A modern version of the original Stingray pickup. The magnets are flush with the bottom of the cover which means it doesn't require the second deeper route of the Stingray pickup. The magnets are exposed, but flat with the cover (i.e. no radius).
The pickup is designed for use as a series hum bucker and does not require a pre-amp. It can also be used in parallel, but the output is lower and requires additonal amplification.
This pickup is intended for 19.20mm spacing measured over the pickup.
Aero does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.