Aero Type 2 PE and Type 2 JB4-B P/J Pickup Set
The Type 2 PE Bass is a replacement pickup for 4-String Fender Precision Basses, and other P-basses. These utilize Alnico V magnet's and are built by hand to provide the highest quality available for P-bass.
These are a low impedance model that produce a more clear acoustic style tone.
This pickup is intended for 19.00mm spacing as measured over the pickup.
The Type 2 JB4-B is a 'long' sized Jazz bass pickup intended for the bridge position on 4-string Jazz basses. These utilize Alnico V magnet's and are built by hand to provide the highest quality available for Jazz bass.
These pickups are lower impedance than the Type 1's, and provide a more detailed, and clear acoustic sound with lower output than the Type 1's.
This pickup is intended for 19.80mm spacing as measured over the pickup.
Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
- Length = 2.20"(56mm) Width = 1.08"(28mm)
- Length = 3.73"(95mm) Width = 0.73"(19mm)
Aero does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.