|
General Description - 59J1 L1\LN1 59J1 L\S 57J1 L\S 59 S72 L1/LN1
These are split coil hum-cancelling designs. They have bright Neck tone and deep Bridge tone. These pickups are wound to yield much more "growl" from the Bridge pickup. They are very similar in tone to the old Bartolini 94J 4 string pickups, just ever so slighlty brighter at the bridge. Tonally, these have stronger lows and low mids than the typical "vintage" tone.
*Note: String spacing over the neck pickup should be 64mm or larger. If not, there may be dropout on the D string. If your string spacing is less than 64mm, consider using a single coil pickup.
59 S72 L1/LN1
Single Coil, low noise pickup. A good choice for basses with the long bridge/long neck pickup sizes that have narrow string spacing.
Classic Bass "CB/CBJD/CBJS" Series
Pickups with a CB or CBJD following main model # are Classic Bass series pickups.
"Classic Bass" CB series bass pickups feature an extended and more resonant frequency range. They have far more "air" and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
CBJD - Dual in-line humcancelling
CBJS - Single Coil
*All are two conductor pickups.
Choosing the correct pickup set size
59 J1 L/S (59 Long/Short) - Click here for diagram of dimensions
59 CBJD L/S (59 Long/Short)
59 CBJS L/S (59 Long/Short)
- Fits non-Fender, J style Basses requiring one long and one short J style pickups
Pickup Length:
Bridge - 95mm (3.73")
Neck - 91mm (3.60")
59 J1 L1/LN1 (59 Long/Long) - Click here for diagram of dimensions
59 CBJD L1/LN1 (59 Long/Long)
59 S72 L1/LN1 (59 Long/Long) - good for narrow string spacing (15,16, 17mm).
- Fits non-Fender, J style Basses requiring two long J style pickups
Pickup Length:
Bridge - 95mm (3.73")
Neck - 95mm (3.73")
57 J1 L/S (57 Long/Short) - Click here for diagram of dimensions
57 CBJD L/S (57 Long/Short)
57 CBJS L/S (57 Long/Short)
- Fits 5 String American Standard J-Bass
Pickup Length:
Bridge - 105mm (4.13")
Neck - 101mm (3.98")
*Bartolini does not provide screws with their pickups.
*If you need pickup screws, you can get them on the Pickup Screws page.
*All of the above Bartolinis are passive designs.
| 
