Based on the Original 1970’s Bartolini HI-A design, the J44J L/S is the b-axis series Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. This set is gaining the interest of highly respected musicians and luthiers alike for its huge punchy tone, precise articulation, rich harmonics and incredible versatility.
They feature a new fully encapsulated Alnico V exposed pole piece design. The b-axis series bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long.
Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
- Length = 3.60"(91.4mm) Width = 0.73"(18.4mm)
- Length = 3.73"(94.6mm) Width = 0.73"(18.4mm)
Intended for 19mm Bridge String Spacing
String Spacing E-Center to G-Center = 53.2mm over Neck Pickup
String Spacing E-Center to G-Center = 56.5mm over Bridge Pickup
Please Note:Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.
By Daniel from on 1/8/2017
Best jazz pickup I have ever tried
By Peter Greaves from on 8/31/2016
Incredible Jazz Bass Pickups.
By Stefan from on 7/15/2016
They look cool with their off set poles and they were very easy to install.