Bartolini NTBT Preamps

Frankie - Bass Tech Will these Bartolini NTBT Preamps work with your Bass? Ask Frankie, our Bass Tech.

Bartolini NTBT Preamps

Bartolini NTBT preamps are among the best known onboard bass preamps. Many major manufacturers as well as most smaller custom builders have Bartolini preamps as an option for their instruments, and many use Bartolini preamps as their standard stock preamp for their basses.

The NTBT come prewired on a harness with gain control trim potentiometer to control overall output. This means that the preamp module comes wired up to the potentiometers, battery connectors and the output jack. In most cases, the only connections that will need to be made are connecting the pickup wires to the pots and ground. Depending on layout, you may need to extend a couple of the wires to reach to the jack.

Bartolini Preamps come prewired from the factory.

The NTBT are wired for 9 Volt operation, but an extra battery clip is included for 18 Volt operation.

**See the Bartolini FAQ section for information about knobs**

Frequently Asked Questions

Question: Where Can I Buy Bartolini NTBT Preamps?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter
  1. Bartolini HR-3.3/918 Pre-Wired Harness

    $159.00
    Bartolini 3.3 Compact Preamp - 2 Band EQ, 3 Pots: (Volume) (Blend) (Treble/Bass Stack)
    Bartolini HR-3.3/918 Pre-Wired Harness 2 Band EQ, 3 Pots: (Volume) (Blend) (Treble/Bass Stack) Specifications Preamp Module Size: 1.76" [44.7mm] Long, 1.02" [25.9mm] Wide, 0.54" [13.7mm] Thick Operating...
  2. Bartolini HR-2.3AP/918 Pre-Wired Harness

    $156.00
    Bartolini 2.3AP Compact Preamp - 2 Band EQ, 3 Pots: (Volume with Pull-Bypass Switch) (Treble) (Bass)
    Bartolini HR-2.3AP/918 Pre-Wired Harness 2 Band EQ, 3 Pots: (Volume with Pull-Bypass Switch) (Treble) (Bass) Specifications Preamp Module Size: 1.76" [44.7mm] Long, 1.02" [25.9mm] Wide, 0.54"...
  3. Bartolini HR-3.3AP/918 Pre-Wired Harness

    $176.00
    Bartolini 3.3AP Compact Preamp - 2 Band EQ, 3 Pots: (Volume with Pull-Bypass Switch) (Blend) (Treble/Bass Stack)
    Bartolini HR-3.3AP/918 Pre-Wired Harness 2 Band EQ, 3 Pots: (Volume with Pull-Bypass Switch) (Blend) (Treble/Bass Stack) Specifications Preamp Module Size: 1.76" [44.7mm] Long, 1.02" [25.9mm] Wide,...
  4. Bartolini HR-2.4AP/918 Pre Wired Harness

    $204.00
    Bartolini 2.4AP Compact Preamp - 3 Band EQ, 3 Pots: (Volume with Pull-Bypass Switch) (Mid with 250/800Hz push-pull) (Treble/Bass Stack)
    Bartolini HR-2.4AP/918 Pre-Wired Harness 3 Band EQ, 3 Pots: (Volume with Pull-Bypass Switch) (Mid with 250/800Hz push-pull) (Treble/Bass Stack) Specifications Preamp Module Size: 1.76" [44.7mm] Long,...

Frequently Asked Questions

Question: Where Can I Buy Bartolini NTBT Preamps?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter