Bartolini X55CBJD 5 String X5 Size Classic Bass Split Coil Set



5 String Classic Bass Split Coil X5 Size Pickup Set

It's Arriving Soon!

Bartolini has told us we will have more of these within a few weeks. Order it now, and we will ship it the same day we receive it from Bartolini.


The X55CBJD B1/T1 is an X5 shape soapbar set with both neck position and bridge position pickups. The dual in-line (hum-cancelling) design features deep tone, strong lows, low mids.

The "Classic Bass" series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more "air" and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.

Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.


  • Length = 4.66"(118.36mm) Width = 0.81"(20.57mm)

Please Note:Bartolini does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.

Click Here for Pickup Screws.


Rate and Review this item
Verified Buyer
Bartolini X55CBJD Review
By Adrian D. Bell from on 12/26/2013
Installed these in a Heartfield DR5 bass; they were a little longer than the stock P/Us so a small amount of routing was necessary; working great.