Best Bass Gear tech Max is back with another how-to video guide. This time he’s walking us through the installation of the Victor Wooten Retrofit Combo.
The combo comes with the PAX and LJVX Pickup Set from EMG and the Flexcore 3 Band Preamp from Micahel Pope Designs.
In the video Max will walk you through the installation from start to finish, with some great tips and tricks, including:
- Using a multimeter to figure out which tab is which on an output jack
- What those tiny jumper blocks are for
- For the PAX, does it matter which half is which?
- How to know if you’ve used enough pickup foam
- Turning your two power wires into one
- Why to wrap your batteries in electric tape
- Why he set the EMGs to a pickup height of 1/16″
