This step is a continuation from part 1. From here, the jig saw is put to use, the edges left behind are filed smooth, pickup cover is test fitted, then cover with pickup is test fitted.
Below: Jig saw put to use. Material is being cut away with a distance of 1/16″ is kept away from the line due to the fact the jig saw leaves behind a rough cut.
Below: Rough jig saw lines completed.
Below: Back to the saw for the next line.
Below: Next line successfully cut.
Below: First piece dropped away.
Below: Both pieces dropped away.
Below: File being used to smooth rough edges
Below: Pickup COVER is test fitted to the template.
Below: Covers WITH pickups are test fitted.
Where are the rest of the build steps?
You can view them all here.