Electronics

Frankie - Bass Tech Will these Electronics work with your Bass? Ask Frankie, our Bass Tech.

We carry a wide array of electronics and electronic components to provide either replacement for your failing electronics or allow you to finish the custom dream build that you are planning or working on. Everything from passive wiring harnesses, potentiometers, switches, jacks, shielding tape for your control cavity, capacitors, jack plates, battery clips, battery holders, and even wire and heat shrink tubing are available. If you require something that you do not see listed please feel free to contact us.

Frequently Asked Questions

Question: Where Can I Buy Electronics?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter
  1. Bourns 250k audio taper mini 6mm (.236 in.) solid shaft potentiometer

    $7.60
    Mini Carbon Element, Solid Shaft.
    Bourns 250k audio taper mini 6mm (.236 in.) solid shaft potentiometer Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element 1/4"...
  2. Bourns 500k audio taper mini 6mm (.236 in.) solid shaft potentiometer

    $7.60
    Mini Carbon Element, Solid Shaft.
    Bourns 500k audio taper mini 6mm (.236 in.) solid shaft potentiometer Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element 1/4"...
  3. NOLL 250k Volume/Volume Potentiometer Linear Taper Stacked 4/6mm Solid Shaft

    $26.00
    2x 250KB Volume Control
    Noll 250k/250k Stacked Volume Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Volume/Volume 250k Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is...
  4. NOLL 250k Volume/Tone Potentiometer Linear/Audio Taper Stacked Push-Pull 4/6mm Solid Shaft

    $44.00
    250KB Volume + 250KA Tone Control (Push/Pull)
    Noll 250k/250k Stacked Volume/Tone Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...
  5. NOLL 250k Volume/Tone Potentiometer Linear/Audio Taper Stacked 4/6mm Solid Shaft

    $26.00
    250KB Volume + 250KA Tone
    Noll 250k/250k Stacked Volume/Tone Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 250KB Volume + 250KA Tone Stacked Control Threaded section is M10 x 0.75,...
  6. NOLL 250k Volume/Volume Potentiometer Linear Taper Stacked Push/Pull 4/6mm Solid Shaft

    $74.00
    2x 250KB Volume Control (Push/Pull)
    Noll 250k/250k Stacked Volume/Volume Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...
  7. NOLL 500k Volume/Volume Potentiometer Linear Taper Stacked Push/Pull 4/6mm Solid Shaft

    $74.00
    2x 500KB Volume Control (Push/Pull)
    Noll 500k/500k Stacked Volume/Volume Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...
  8. Jack - Switchcraft Stereo Long Threaded Jack

    $18.98 - $23.00
    Long Threaded Barrel Input Jack
    Long Threaded Barrel Input Jack, Stereo, Gold, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo. 1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".
  9. Jack - Switchcraft Stereo Output Jack

    $6.83
    1/4 Output Jack
    1/4 Output Jack, Stereo, Switchcraft #12B, with nut and washer. A stereo output jack is used for stereo wiring, or to turn on/off onboard active systems when the plug is inserted. Requires 3/8"-diameter mounting hole; 3/8 x 32 threaded portion is 3/8"...
  10. Passive Tone Control Module

    $29.00
    Passive Tone Control Module can easily be added to any one or two pickup preamp, with one volume control, two volume controls, or a blend control and master volume control. The passive tone control will function when the preamp is in active...
  11. Prewired Passive Harness (Volume/Tone Stack, Blend)

    $48.00
    Control Configuration Volume/Passive Tone Stack Blend Description This 2 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the G&L SB2 ® bass. These...
  12. Prewired Passive Harness (Volume/Tone Stack, Volume/Tone Stack)
    Out of stock

    Prewired Passive Harness (Volume/Tone Stack, Volume/Tone Stack)

    Out of stock

    $53.00
    Control Configuration Volume/Passive Tone Stack Blend Description This 2 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the G&L SB2 ® bass. These prewires...
  13. Prewired Passive Harness (Volume/Tone Stack, Blend) Solderless

    $67.00
    Solderles Volume / Passive Tone Stack - Blend Control Configuration Volume/Passive Tone Stack Blend Description The pickup and ground conections are mader to the prewired harness...
  14. NOLL 500k Tone/Tone (or, Volume/Volume, or Volume/Tone) Potentiometer Audio Taper Stacked 4/6mm Solid Shaft

    $31.00
    2x 500KA Tone or Volume
    Noll 500k/500k Stacked Tone/Tone (or, Volume/Volume, or Volume/Tone) Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 500KA Stacked Tone or Volume Control Threaded...
  15. NOLL 250k Tone/Tone Potentiometer Audio Taper Stacked Push/Pull 4/6mm Solid Shaft

    $74.00
    2x 250KA Tone Control (Push/Pull)
    Noll 250k Stacked Tone/Tone Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive...
  16. NOLL 250k Tone/Tone (or, Volume/Volume, or Volume/Tone) Potentiometer Audio Taper Stacked 4/6mm Solid Shaft

    $26.00
    2x 250KA Tone or Volume
    Noll 250k/250k Stacked Tone/Tone (or, Volume/Volume, or Volume/Tone)Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 250KA Stacked Tone or Volume Control Threaded...
  17. NOLL 50k EQ Potentiometer Linear Taper Stacked Push/Pull 4/6mm Solid Shaft Center Click

    $74.00
    2x 50KB Active Tone (Push/Pull) Control Center Click
    Noll 50k/50k Stacked Tone/Tone Push-Pull Control Center Click This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup...
  18. NOLL 50k EQ Potentiometer Linear Taper Stacked 4/6mm Solid Shaft Center Click

    $74.00
    2x 50KB Active Tone Control Center Click
    This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 50KB Stacked Active Tone Control Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is 6mm lower, 4mm upper. 20mm...
  19. Noll 500k Stacked Volume/Volume (Push/Pull) Control

    $74.00
    2x 500kA Volume Control (Push/Pull)
    Noll 500k/500k Audio Taper Stacked Volume/Volume Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control...
  20. Richter JB-VVT Passive Control Plate with Solderless connections

    $74.95
    Richter JB-VVT Passive Control Plate (Volume - Volume - Tone) with Solderless connections
    JB Passive Control Plate with Shielding for Jazz Bass™ :: High Quality Dustproof Pots :: Rugged and Shielded :: :: Quick and Easy Mounting :: No Soldering Required :: The Richter JB PASSIVE control plate is an easy mounting component...
  21. Prewired Passive Harness (Volume-Volume-Tone-Tone)

    $48.00
    Control Configuration Volume Volume Tone Tone Description This 4 control passive prewire is intended for instruments with 2-pickups, and independent Tone control for each pickup. These...
  22. Prewired Passive Harness (Volume - Blend - Tone - Tone)

    $58.00
    Control Configuration Volume Blend Tone Tone Description This 4 control passive prewire is intended for instruments with 2-pickups, and independent Tone control for each pickup. These prewires...
  23. Prewired Passive Harness (Volume-Tone)

    $31.00
    Control Configuration Volume Tone Description This 2 control passive prewire is intended for instruments with a single pickup, and tone control like the Fender Precision ® bass. These prewires are...
  24. Prewired Passive Harness (Volume-Volume-Tone)

    $35.00
    Control Configuration Volume Volume Tone Description This 3 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the Fender Jazz ® bass. These...
  25. Prewired Passive Harness (Volume-Blend-Tone)

    $39.00
    Control Configuration Volume Blend Tone Description This 3 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the Fender Jazz ® bass. These prewires...
  26. NOLL No. P 1030 Passive Tone Control - 250KA/50KB Potentiometer

    $19.00
    Mono Single Shaft - Tone Control - 250KA/50KB
    NOLL No. P 1030 Passive Tone Control - 250KA/50KB Potentiometer This special double function potentiometer design is for combine passive tone control with active treble control in a single shaft unit. In active mode the 50KB section with...
  27. Bourns 500k linear taper mini 6mm (.236 in.) solid shaft potentiometer

    $5.95
    Bourns Mini Linear Taper Guitar pots.
    Bourns 500k linear taper mini 6mm (.236 in.) solid shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Solid Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation 1/4"...
  28. CTS Audio 250k knurled split shaft DPDT potentiometer

    $13.95
    CTS Audio 250k knurled split shaft DPDT potentiometer Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel,...
  29. Bourns 250k linear taper mini 6mm (.236 in.) split shaft potentiometer

    $8.00
    Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 250k linear taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...

Frequently Asked Questions

Question: Where Can I Buy Electronics?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter