Electronics
Will these Electronics work with your Bass?
Ask Frankie, our Bass Tech.We carry a wide array of electronics and electronic components to provide either replacement for your failing electronics or allow you to finish the custom dream build that you are planning or working on. Everything from passive wiring harnesses, potentiometers, switches, jacks, shielding tape for your control cavity, capacitors, jack plates, battery clips, battery holders, and even wire and heat shrink tubing are available. If you require something that you do not see listed please feel free to contact us.
Frequently Asked Questions
Question: Where Can I Buy Electronics?
Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs
Delano Mini Toggle Switch - 2-Pole On/Off/On
$10.00On-Off-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/Off/On Specifications Type: mini toggle switch Electrical function: on/off/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...3 Way Switch - On Off On Mini Switch
$18.71On-Off-On Mini Switch, DPDT, With Mounting Hardware
On-Off-On Mini Switch, DPDT, With Mounting Hardware Specifications 5/16" thread bushing height 1/4" diameter hole 5/8" body cavity depth needed Knob portion is 12mm longDelano Mini Toggle Switch Chrome - 2-Pole On/On/On
$14.50On-On-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/On/On Specifications Type: mini toggle switch Electrical function: on/on/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...500K-500K Stacked Concentric Pot
$16.00Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer
Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer. Metric. Outer (lower) shaft 8mm diameter, inner (upper) shaft 6mm diameter. Outer (lower) shaft 10mm height, inner (upper) shaft 10mm height. Threaded...Alpha 25k Volume Potentiometer Audio Taper Push/Pull 6mm Split Shaft
$17.31Alpha 25k Volume Push/Pull Potentiometer
Alpha 25k Audio Taper Volume Push/Pull Potentiometer with 6mm Split Shaft For use with active pickups like EMGAlpha 500k Volume Potentiometer Audio Taper 6mm Split Shaft
$4.79500K Volume Pot
500K Mini Pot, Audio Taper, 3/8" Long Bushing, Split, Knurled Shaft with Nut and WasherAlpha 500k Volume Potentiometer Audio Taper Push/Pull 6mm Split Shaft
$13.89500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer.
500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer. Split-ShaftAlpha 25k Blend Potentiometer MN Taper 6mm Split Shaft
$16.50Dual 25k Blend/Balance MN Taper Pot.Use with active pickups
Dual 25k Blend/Balance MN (linear) Taper Pot, with Center Detent and hardware. Use with active pickups, EMG...some others Technical Specifications: Threaded Bushing Diameter: ~.272" Threaded...3 Way Switch - On On On Mini Switch
$18.98On-On-On Mini Switch, DP3T, With Mounting Hardware
On-On-On Mini Switch, DP3T, With Mounting Hardware2 Way Switch - On On Mini Switch
$14.85 - $18.43On-On Mini Switch, DPDT, With Mounting Hardware
On-On Mini Switch, DPDT, With Mounting HardwareBrass Pot Sleeves (Set of 2)
$2.10Allows you to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.
Pair of Brass Pot Sleeves (Quantity of two) Used to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.Switchcraft Mono Jack
$6.04Switchcraft #11 1/4" Mono Input Jack
1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.Battery Terminals 9v - 9 Volt with wire
$3.30battery terminal clip with wire
Battery terminal clip with lead wires. Dimensions:Height from Top of Battery .029", Width of Clip = .048", Length = 1" Approx.Copper Shielding Tape
$7.521 Inch x 5 feet
Copper Shielding Tape: 1 Inch x 5 feet Simple Guide on How To Install Copper ShieldingHeat Shrink - 1/16 inch Diameter
$0.523" Piece 1/16" Diameter
Heat Shrink 3" Piece 1/16" Diameter. Good for wire to wire connectionBlack Dress Washers for Input Jacks
$5.78Black Potentiometer and Jack Washer (25 pieces)
Extra Dress Washers (25 pieces) for Pots and Input Jacks, BlackCloth Wire Kit
$6.25Vintage Cloth Push-Back Wire Set
Vintage Style Gavitt Cloth Covered Wire Set 2' Black & 2' White. 22 gauge tinned, Single Conductor, seven strand, Vintage Style, push back, cloth covered wire. Stranded wire with a waxed braided cotton outer insulation.Black Nuts 25 piece pak
$15.35Black Potentiometer and Jack Nut (25 pieces)
Extra Nuts for Pots and Input Jacks (25 pieces), Black 3/8" x 32 thread Check the existing dimensions of your potentiometer, or input jack for compatibility on sizing.Heat Shrink - 1/8 inch Diameter
$0.373" Piece. 1/8" Diameter
Heat Shrink 3" Piece. 1/8" Diameter.Good for wire to jack lug connection4-Pole On On 4PDT Chrome Mini Switch
$14.86On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome.
On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome. Approximately 13mm x 23mm x 10.8mm tall.Black Chrome On On Round Bat Mini Switch
$5.44Black-Chrome On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.3-Way On-On-On Black Chrome Round Bat Mini Switch
$10.65Black Chrome DPDT On-On-On Switch
Black Chrome On-On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.4P3T On-On-On Chrome Mini Switch
$38.50Chrome On-On-On 4P3T Switch
On-On-On, 4-Pole, 4P3T, Mini Switch (12 Terminals). Chrome finish. This switch is intended for those that desire a singular 3-way switch to control coil tapping functions for both neck and bridge pickup from one switch. Only available...
