Hardware

Dunlop Strap Buttons in Nickel, Black, or Gold
Extra Straplock Buttons (for those with many basses but few straps). Two buttons for Dunlop® strap lock system, with screws. This is only the buttons.

Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel.
Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel. Measurements: .125" x .325" x 24" Due to the size/shape of this item, free shipping...

1/8" inner diameter, 1/4" outer Diameter. 1/16" Wall
One 2" Piece typically adequate for 4 screws.

24-inch (608mm) Truss Rod
Technical Specifications: Dual Action 4mm Adjustment Wrench Included Adjuster nut has an outside diameter of 0.33"(8.3mm) Wrapped Straight bit (.25") used to route main channel Cove...

1/2" Thick X 1/2" Wide X 8" Long
One 8" Piece typically adequate for 2 Jazz Style Pickups.  Wondering how to use this? Check out this article on setting your...

3-Hole Jazz Bass Control Plate
Jazz Bass control plate with three holes for controls. Perfect for building your own 62' Jazz Bass style passive control layout.

1 Rectangular Piece
Black acrylic sheet to be used for back plate. One side is shiny black, the other side is satin black. Each piece sold separately. Each piece sold as a rectangular sheet for you to create a back plate to your own shape/styling needs Each...

A tribute to the GK800RB amplifier served on a Jazzplate with active/passive switching and a new Contour switch feature.
800JP Jazzplate (Volume-Volume) The 800JP (previously 800TS) preamp borrows the EQ section of the famous GK800RB amplifier and squeezes it into an onboard preamp, loaded into a Jazz-plate, for you Jazz bass lovers. This tone stack has...

Volume-Blend configuration, solderless, fits most Jazz Basses without modifications.
Lusithand NFP Jazz Control Plate (Volume-Volume) The NFP Jazzplate is just an easy way for Jazz bass players to have the NFP filter sound on their instruments. It is solderless and it should fit on most Jazz basses on the market without any...

Lusithand NFP Double Jazz Control Plate
Lusithand NFP Double Jazz Control Plate This is a direct replacement plate that will fit most Jazz basses. It's solderless and very easy to install, no need for opening holes for batteries as a single 9v sits perfectly in the cavity. The...

800TS Jazzplate
800TS Jazzplate A tibute to the GK800RB amplifier served on a Jazzplate with active/passive switching. Get that signature sound, straight out of your bass. Make it growl, make it deep, make it clear. It’s all there!! Acive...

A tribute to the GK800RB amplifier served on a Jazzplate with active/passive switching and a new Contour switch feature.
800JP Jazzplate (Volume-Blend) The 800JP (previously 800TS) preamp borrows the EQ section of the famous GK800RB amplifier and squeezes it into an onboard preamp, loaded into a Jazz-plate, for you Jazz bass lovers. This tone stack has...

JB plate replacement for Jazz bass with Volume, Blend, Tone, with solderless connections
Richter JB-VBT Preamp - JB plate replacement for Jazz bass The RICHTER JB PASSIVE control plate is an easy mounting component for passive bass guitars like the Jazz Bass TM. It provides a volume pot, an MN taper balance pot and one tone control...

Volume-Volume configuration, solderless, fits most Jazz Basses without modifications.
Lusithand NFP Jazz Control Plate (Volume-Volume) The NFP Jazzplate is just an easy way for Jazz bass players to have the NFP filter sound on their instruments. It is solderless and it should fit on most Jazz basses on the market without any...

NOLL 9 lug Stereo Jack High quality ¼" stereo jack with 2 switches. Used for our parametric preamps and switching on a battery in an active system when a ¼" plug is inserted. Requires ⅜"-diameter mounting...

...

Long-threaded jack for mono ?and? stereo applications Nickel
Pure Tone Mono/Stereo 1/4in. Barrel Jack 35 mm (1.38") threaded shaft length / 40 mm (1.57") overall shaft length. This new panel-mount jack boasts full contact for optimal signal and lowest possible noise. Greater surface...

Pure Tone Mono Output Jack The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a...

*Stereo version for instruments with stereo outputs or active electronics*
Pure Tone Stereo Output Jack The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies...

Long Threaded Barrel Input Jack
Long Threaded Barrel Input Jack, Stereo, Gold, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo. 1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".

1/4 Output Jack
1/4 Output Jack, Stereo, Switchcraft #12B, with nut and washer. A stereo output jack is used for stereo wiring, or to turn on/off onboard active systems when the plug is inserted. Requires 3/8"-diameter mounting hole; 3/8 x 32 threaded portion is 3/8"...

The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...

Switchcraft #11 1/4" Mono Input Jack
1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.

Fits standard split shaft pots with 6mm diameter. Push-on knobs.
Fits standard split'shaft pots with 6mm diameter. Push-on knobs.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Beveled Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw. Dimensions of 3/4"(19.0mm) diameter x 3/4"(19.0mm) height.

Dual Concentric Knob in Chrome or Black
Lusithand Concentric Knob Dual concentric knobs to use with dual-concentric potentiometers. For 8mm ⌀ (bottom)  and 6mm ⌀ (top) shafts.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw.
Concentric Stacked Metal Beveled Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw....

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Dome Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.23/32"(18.2mm) inch tall x 3/4"(19.0mm) inch wide.