Jacks
Will these Jacks work with your Bass?
Ask Frankie, our Bass Tech.
8 Item(s)
Page: 1 of 1
Frequently Asked Questions
Question: Where Can I Buy Jacks?
Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs
NOLL 9 lug Stereo Jack
$14.00 - $20.00NOLL 9 lug Stereo Jack High quality ¼" stereo jack with 2 switches. Used for our parametric preamps and switching on a battery in an active system when a ¼" plug is inserted. Requires ⅜"-diameter mounting...Pure Tone Mono/Stereo 1/4in. Barrel Jack Nickel
$9.99Long-threaded jack for mono ?and? stereo applications Nickel
Pure Tone Mono/Stereo 1/4in. Barrel Jack 35 mm (1.38") threaded shaft length / 40 mm (1.57") overall shaft length. This new panel-mount jack boasts full contact for optimal signal and lowest possible noise. Greater surface...Pure Tone Mono Output Jack
$4.20 - $7.99Pure Tone Mono Output Jack The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a...Pure Tone Stereo Output Jack
$5.20 - $7.99*Stereo version for instruments with stereo outputs or active electronics*
Pure Tone Stereo Output Jack The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies...Jack - Switchcraft Stereo Long Threaded Jack
$18.98 - $23.00Long Threaded Barrel Input Jack
Long Threaded Barrel Input Jack, Stereo, Gold, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo. 1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".Jack - Switchcraft Stereo Output Jack
$6.831/4 Output Jack
1/4 Output Jack, Stereo, Switchcraft #12B, with nut and washer. A stereo output jack is used for stereo wiring, or to turn on/off onboard active systems when the plug is inserted. Requires 3/8"-diameter mounting hole; 3/8 x 32 threaded portion is 3/8"...Switchcraft Mono Jack
$6.04Switchcraft #11 1/4" Mono Input Jack
1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.