|
Mid Sweep 01 Mid Control Description
The MID SWEEP 01 is a stand-alone mid control which can be used on its own
or cascaded in conjunction with other modules, including additional MID
SWEEP 01s. The sweep frequency band is switchable, via DIL switches on the
circuit board, between two overlapping ranges.
HARDWARE OPTIONS: Chrome, Black or Gold. (Can be mixed by special request)
POWER REQUIREMENTS: 9-18V, 1.25mA
DIMENSIONS: 20.5 X 43.5.0 X 15.0 mm (0.8" X 1.7" X 0.6")
MID SWEEP 01 TECHNICAL TEXT:
The MID SWEEP 01 is based on the mid control stack of the J-Retro 01 bass
preamp. It consists of a single dual concentric knob stack with controls
for MID level boost/cut and MID FREQUENCY SWEEP setting.
MID SWEEP Stack:
BOOST/CUT (+/-12dB)
The upper knob sets the amount of Mid boost or cut at frequencies according
to the setting of the Frequency knob. The midway indent is the 'flat'
setting.
FREQUENCY (100Hz - 1kHz, or 200Hz - 2kHz)
The lower outer ring sets the continuously variable Mid frequencies for
boost or cut. DIL switches in the circuit board allow low or high ranges to
be set. Both switch sections should be set to ON for the Low Range and both
set to OFF for the High Range.
POWER:
This unit can be powered from 9- 8 Volts DC.
|
