More Views

John East Uni-Pre 2-Pickup 4-Knob 3-Band Vol/Bl Stack - Treb/Bass Stack - Mid/Mid Stack - Tone P/P A/P (Chrome Knobs)

SKU:BBG 6841
$325.00

Details:

  • 3-band: 2-pickup, 4-knob
  • Volume/Blend Stack - Treb/Bass Stack - Mid/Mid Freq Stack - Passive Tone (A/P Push-Pull)
FREE SHIPPING | EASY RETURNS
In Stock Today

Details

Uni-Pre 4 Knob Chrome

2 Pickup, 4-knob

  1. Volume/Blend Stack
  2. Treble/Bass Stack
  3. Midrange/Midrange Freq. Stack
  4. Passive Tone (Push/Pull for Active/Passive)

The Uni-Pre 4 Knob is a new generation bass preamp system from East UK.

It's a brand new design that sets new standards with unique features, designed to fit virtually any bass which has 3 knobs with rear cavity electronics.

It also requires a toggle for active/passive switching.

Its main components are a Volume/Blend module and EQ.

The Volume/Blend has totally independent dual active and passive signal paths, controlled simultaneously with a conventional knob set.

The EQ module allows internal voicing adjustment for the treble as well as the lower and upper bass frequencies.

This is in order to allow finely tuned focus on the most crucial bass spectrum.

Modular construction makes for easy installation, with simple plug connections between modules.

External wiring, such as pickups and power, are simply connected using screw terminals.

The potentiometers have 10.0mm threaded bushings designed for rear cavity mounting in the bass. Flat wire connections to the potentiometers and toggle switch allow for a flexible layout.

The preamp comes fully wired including battery clip and Switchcraft jack.

For ease of installation, pickups are connected via screw terminals.

A ground wire will need to be connected to grounding points such as the bridge and any internal shielding.

Out of the box, just connect the pickups using the screw terminals, snap in a battery, and you'll get sound.

Features

  • Totally independent active and passive signal paths guarantee completely smooth blend when set to active.
  • Custom designed pots allow optimal placement of all controls within active and passive signal paths.
  • Class A FET input stages for great sound quality, with two gain trim preset adjustments for each pickup.
  • Operational response of Bass Control can be set internally at both the lower and upper ends of the bass spectrum.
  • Treble Control with internally adjustable frequency voicing, plus Bright as a pull switch.
  • Mid Control with Frequency Sweep.
  • Overall response can be set as flat or with pre-shaper contour, which adds some warmth and sheen.
  • Modular concept allows for easy installation and replacement of parts should that ever be necessary, all with pluggable connections.
  • Screw terminals are used for all external connections such as pickups, power and grounding, for easy installation.
  • Reviews

    Rate and Review this item
    Verified Buyer
    John East Uni-Pre : Homerun from across the pond!
    By Alex Mouroulis from on 11/2/2016
     
    The pickup balance feature is the primary reason to rock this preamp. This allowed me to dial in a ton of bridge pickup on my J J configuration. Though I play this bass primarily in passive mode, now I have a much more modern sound on tap with one click. I went with the flat setting (no pre-shape) to keep the sound pretty honest. The bass window adjustment is a bit tricky to adjust at 1st, but once dialed in to the right frequencies, becomes very usable. Mid sweep and boost I adjusted the frequency once and is very useable. The treble is a bit crispy, I may not have the shelving adjusted correctly yet. I do play with the tone control wide open for the most part. That could be an influencing factor on my treble perception. I did pay a bit more to go with BBG but Max's time and advice was priceless. The follow up pre and post sale makes it well worth it. I am very pleased overall