Jazz Bass Configuration
The neck position is wound "top going" and North polarity. The bridge position is wound "top coming" and South polarity. When used in combination with each other the pickups will be hum-canceling. Both pickups have the traditional pole spacing. The magnets are protruding from the top and bottom of the flatwork for a smooth even response. Each pickup is recreated to fit in your old classic and comes with black aged pickup cover, schematic, and mounting screws. Hookup wire is the classic "push back" c braid wire.
- Length = 3.602"(91.5mm) Width = 0.718"(18.2mm)
- Length = 3.715"(94.4mm) Width = 0.718"(18.2mm)
Precision Bass Configuration
The two bobbins are reverse wound and reverse polarity to make the pickup humbucking. The pickups are hand fabricated and wound using traditional techniques and use classic "push back" cloth braid hookup wire. Each pickup comes with aged black covers, schematics and mounting screws
- Length = 2.221"(56.4mm) Width = 1.088"(27.6mm)
'51 Precision Configuration
This single coil pickup is a replica of the ones found in the early "Telecaster™" single coil P-Bass™. It has four alnico magnets for the traditional sound. Each coil is wound with plain enamel magnet wire and protected with wax coated string. Hookup wire is the classic "push back" cloth braid wire.
- Length = 2.875"(73.0mm) Width = 0.770"(19.6mm)
Please Note: Seymour Duncan supplies chrome pickup screws with their pickups. If you require black or gold screws, we carry them on our pickup screws page.