Seymour Duncan SJB Single Coil Pickups

We are not authorized to ship Seymour Duncan products outside of the United States and Canada.

SJB-1 Vintage Single Coil Configuration

This pickup gives you the traditional sound of a vintage pickup for Jazz Bass™. The single coil construction brings out the warmth and fullness of the instrument while maintaining clarity and definition. The neck version is reverse wound/reverse polarity (RW/RP) to create a humbucking effect when used together with the bridge model. The bridge model is specially calibrated for the bridge position where there is less string excursion. Pickup cover included.

Classic early Jazz Bass sound and look. Single Coil.

Dimensions

Neck Pickup

• Length = 3.602"(91.5mm) Width = 0.718"(18.2mm)

Bridge Pickup

• Length = 3.715"(94.4mm) Width = 0.718"(18.2mm)

SJB-2 Hot Single Coil Configuration

This pickup delivers more output and punch than the SJB-1. You get a deeper low-end response than stock pickups. Like all Basslines ™ pickups, the SJB-2b is wax potted to reduce microphonics and feedback.

Pickup cover included.

Fat and warm with plenty of output. Single Coil.

Dimensions

Neck Pickup

• Length = 3.625"(92mm) Width = 0.741"(19mm)



Bridge Pickup

• Length = 3.73"(95mm) Width = 0.741"(19mm)

SJB-3 Quarter Pounder Configuration

The SJB-3 has been developed for the studio or concert musician who needs a strong attack. This pickup has quarter-inch wide rod magnets designed to deliver a fuller sound with great sustain and response.

Pickup cover included.

High output with lots of clarity and high-end punch. Single Coil.

Dimensions

Neck Pickup

• Length = 3.625"(92mm) Width = 0.741"(19mm)

Bridge Pickup

• Length = 3.73"(95mm) Width = 0.741"(19mm)

SJB-5 5-String Stacked Coil Configuration

Blade-type, lower output, flat response passive system.

Pickup covers included

Punchy, clean and defined with low output (good for preamps). Humcancelling.

Not a retrofit for Fender™5 strings....please check dimensions.

Dimensions

Neck Pickup

• Length = 3.625"(92mm) Width = 0.741"(19mm)



Bridge Pickup

• Length = 3.74"(95mm) Width = 0.741"(19mm)

Please Note: Seymour Duncan supplies chrome pickup screws with their pickups. If you require black or gold screws, we carry them on our pickup screws page.

Click Here for Pickup Screws