Preamps

Frankie - Bass Tech Will these Preamps work with your Bass? Ask Frankie, our Bass Tech.

Best Bass Gear is proud to be able to offer you a wide array of onboard preamps for your EQ and tone shaping needs. We offer systems custom prewired in house and also wired by the manufacturer with a large selection of control configurations for almost any bass.We stock only the highest quality manufacturers including ACG, Aguilar, Bartolini, Glockenklang, John East, Mike Pope, Nordstrand, and Seymour Duncan.

Frequently Asked Questions

Question: Where Can I Buy Preamps?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter
  1. Bartolini NTBT 2-Band EQ Preamp Module

    $88.00
    2-band tone control preamp with fully independent Bass and Treble controls
    Bartolini NTBT 2-Band EQ Preamp Module The NTBT is a 2-band tone control preamp with fully independent Bass and Treble controls. The voice is clear, transparent, and strong with ultra-low distortion. The NTBT features a pre-wired adjustable...
  2. Bartolini MCT-3MC Mid Boost Module for TCT

    $24.00
    Mid Boost Module for TCT family - 250,500,750Hz
    Bartolini MCT-3MC Mid Boost Module for TCT Mid Boost Module for TCT family - 250,500,750Hz Specifications Module Size: 1.05" [26.7mm] Long, 0.79" [20.1mm] Wide, 0.43" [10.9mm] Thick Operating...
  3. Richter PB-1 Preamp/Booster

    $94.99
    Linear precision Amplifier for E-guitar and - bass
    The RICHTER PB-1 onboard Booster is an linear precision Amplifier for E-guitar and - bass. It provides a trim pot for the adjustment of the gain (0 to 18 dB) and an outstanding audio performance by careful design and the use of the best components...
  4. Bartolini TC2 Preamp Module

    $52.00
    TC Boost Preamp, Dual Channel, Low Noise, 8X (18dB) Gain
    Bartolini TC2 Preamp Module The TC series are our original preamps known as "The Chip". The TC3 is especially popular. They are hand-made with discrete electronic components for very low noise, outstanding distortion characteristics...
  5. Bartolini AGMPBoo Magnetic and Piezo Buffer Kit

    $96.00
    Bartolini AGMPBoo Mag/Piezo Buffer
    Bartolini AGMPBoo Magnetic and Piezo Buffer Kit The AGMPB/918 is a dual-channel buffer/preamp that provides a high impedance input for use with piezo or microphonic transducers and channel isolation for magnetic pickups. Both channels are equipped...
  6. Bartolini AGMPB/918 Magnetic and Piezo Buffer Kit

    $79.00
    Bartolini AGMP/918 Mag/Piezo Buffer
    Bartolini AGMPB/918 Magnetic and Piezo Buffer Kit The AGMPB/918 is a dual-channel buffer/preamp that provides a high impedance input for use with piezo or microphonic transducers and channel isolation for magnetic pickups. Both channels are...
  7. Bartolini TC4 Preamp Module

    $52.00
    TC Boost Preamp, Dual Channel, Low Noise, 4X (12dB) Gain
    Bartolini TC4 Preamp Module The TC series are our original preamps known as "The Chip". The TC3 is especially popular. They are hand-made with discrete electronic components for very low noise, outstanding distortion characteristics...
  8. Bartolini TC5 Preamp Module

    $36.00
    TC Boost Preamp, Single Channel, Low Noise, 2X (6dB) Gain
    Bartolini TC5 Preamp Module The TC series are our original preamps known as "The Chip". The TC3 is especially popular. They are hand-made with discrete electronic components for very low noise, outstanding distortion characteristics...
  9. Bartolini TC6 Preamp Module

    $52.00
    TC Boost Preamp, Dual Channel, Low Noise, 2X (6dB) Gain
    Bartolini TC6 Preamp Module The TC series are our original preamps known as "The Chip". The TC3 is especially popular. They are hand-made with discrete electronic components for very low noise, outstanding distortion characteristics...
  10. Bartolini AG2PB Preamp Module

    $95.00
    Dual or Single channel buffer preamp for high-impedance pickups
    Bartolini AG2PB Preamp Module The AGPB/918 is a high impedance preamp for use with piezo or microphonic transducers. It that features adjustable gain which allows you to boost the input signal up to 12dB (4X) while maintaining flat frequency...
  11. Bartolini TCT 3-Band Preamp Module

    $84.00
    TCT Vintage 3-Band EQ Pre-amp with high-Q mid dip at 300Hz
    Bartolini TCT Preamp Module TCT is the legendary original Bartolini on-board preamp. It has Bass, Mid, and Treble controls with very low noise and wide adjustment range. The TCT was briefly discontinued, but we brought it back due to high demand...
  12. Bartolini MCT-250 Preamp Module

    $19.00
    Mid Boost Module for TCT family - 250Hz
    Bartolini MCT-250 Preamp Modules The TCT Family EQ Preamp modules can be mixed and matched with MCT mid boost modules for different mid boost frequencies. The MCT modules provide additional treble boost as well. TCT Family preamps provide...
  13. Bartolini MCT-375 Preamp Module

    $19.00
    Mid Boost Module for TCT family - 375Hz
    Bartolini MCT-375 Preamp Modules The TCT Family EQ Preamp modules can be mixed and matched with MCT mid boost modules for different mid boost frequencies. The MCT modules provide additional treble boost as well. TCT Family preamps provide...
  14. Bartolini MCT-500 Preamp Module

    $19.00
    Mid Boost Module for TCT family - 500Hz
    Bartolini MCT-500 Preamp Modules The TCT Family EQ Preamp modules can be mixed and matched with MCT mid boost modules for different mid boost frequencies. The MCT modules provide additional treble boost as well. TCT Family preamps provide...
  15. Richter JB-VVT Passive Control Plate with Solderless connections

    $74.95
    Richter JB-VVT Passive Control Plate (Volume - Volume - Tone) with Solderless connections
    JB Passive Control Plate with Shielding for Jazz Bass™ :: High Quality Dustproof Pots :: Rugged and Shielded :: :: Quick and Easy Mounting :: No Soldering Required :: The Richter JB PASSIVE control plate is an easy mounting component...
  16. Bartolini XTCT 3-Band Preamp Module

    $84.00
    XTCT 3-band Preamp Module
    Bartolini XTCT 3-Band Preamp Specifications Preamp Module Size: 1.76" [44.7mm] Long, 1.02" [25.9mm] Wide, 0.54" [13.7mm] Thick Operating Voltage: 9V - Prewired battery...
  17. Passive Tone Control Module

    $29.00
    Passive Tone Control Module can easily be added to any one or two pickup preamp, with one volume control, two volume controls, or a blend control and master volume control. The passive tone control will function when the preamp is in active...
  18. Lusithand Single NFP Preamp

    $99.99
    Lusithand Single NFP Preamp The NFP is a filter preamp alike the ones seen on basses like the Alembic or Wal. Being a low pass filter, it lets all bass frequencies pass through up to 4Khz where it starts cutting. The cutoff point has a resonant...
  19. EMG 1 or 2 Pickups Wiring Kit

    $49.00
    EMG 1 or 2 pickup wiring kit - Short Shaft
    EMG 1 or 2 pickup wiring kit - Short Shaft All of the solderless components for install in one package! This kit includes everything needed for installation in a 1 or 2 pickup configuration. This kit is for active pickups.What's...
  20. Richter HA-1 Onboard Headphone Amplifier

    $94.95
    Outstanding Audio Performance - Low Noise Amplifier Design - Rugged and Shielded - 3.5 mm Output Jack
    HeadAmp HA-1 HeadAmp onboard The RICHTER HA-1 onboard headphone amplifier was designed for the use inside a bass or guitar. It provides low noise, smooth, full and precise signal reproduction without loosing any details on sound even in deep...
  21. Richter PB-VT Passive Control Unit with Solderless connections

    $49.95
    Precision Bass replacement unit with Volume, Tone, and solderless connections.
    Richter PB-VT passive replacement kit with shielding The RICHTER PB PASSIVE Control Unit is an easy mounting component for passive bass guitars like the Precision Bass™. It provides a volume and a tone pot. A shielded PCB replaces...
  22. Seymour Duncan STC-2S-BO 2 Band EQ Separate
    Out of stock

    Seymour Duncan STC-2S-BO 2 Band EQ Separate

    Out of stock

    $69.00
    2-Band: Treb/Bass
    We are not authorized to ship Seymour Duncan products outside of the United States and Canada. Controls: Treble/Bass Separate Add versatility to your bass with...
  23. EMG B245 Pickup Buss

    $12.00
    The B245 EMG Pickup Buss is used on two pickup guitars that have a selection switch. The buss provides a convenient way to install either Active or Passive EMG Pickups without soldering.
  24. Bartolini AGB/918-2 Adustable Single Input Gain Buffer

    $52.00
    Buffer, Adjustable Gain, Single Channel, 9 or 18V for Magnetic Pickup
    Bartolini AGB/918-2 Adustable Single Input Gain Buffer Buffer, Adjustable Gain, Single Channel, 9 or 18V for Magnetic Pickup Specifications Module Size: 1.05" [26.7mm] Long, 0.79" [20.1mm] Wide,...
  25. Seymour Duncan STC-2C-BO 2 Band Preamp EQ with Concentric Knobs
    Out of stock

    Seymour Duncan STC-2C-BO 2 Band Preamp EQ with Concentric Knobs

    Out of stock

    $69.00
    2-Band: Treb/Bass
    We are not authorized to ship Seymour Duncan products outside of the United States and Canada. Controls: Treble/Bass Stack Add active EQ to your P or J without...
  26. Bartolini AGDB/918-2 Adjustable Dual Input Gain Buffer Preamp Module

    $76.00
    Buffer, Adjustable Gain, Dual Channel, 9 or 18V for Magnetic Pickup
    Bartolini AGDB/918-2 Adjustable Dual Input Gain Buffer Buffer, Adjustable Gain, Dual Channel, 9 or 18V for Magnetic Pickup Specifications Module Size: 1.05" [26.7mm] Long, 0.79" [20.1mm] Wide, 0.43"...
  27. Bartolini TC3 Preamp Module

    $36.00
    TC Boost Preamp, Single Channel, Low Noise, 4X (12dB) Gain
    Bartolini TC3 Preamp TC Boost Preamp, Single Channel, Low Noise, 4X (12dB) Gain Specifications Module Size: 1.05" [26.7mm] Long, 0.79" [20.1mm] Wide, 0.43" [10.9mm] Thick Operating...
  28. EMG BTS Control 1 or 2-Pickup 2-Knob 2-Band Treb - Bass

    $99.00
    2-Band: 2-Knob Treb - Bass
    Control Configuration Treble Bass The BTS Control 2-band equalizer is similar to the BTC Control, except with the BTS you'll get separate controls for the bass and treble. Often preferred for their less selective,...
  29. EMG BTC Control 1 or 2-Pickup 1-Knob 2-Band Treb/Bass Stack

    $99.00
    2-Band: 1-Knob Treb/Bass
    Control Configuration Treble/Bass Stack Why not equip your bass with the most widely used EQ System in the world? With the BTC you’ll get a bass and treble equalizer on a concentric (stacked) pot that will work with any...
  30. EMG VMC Variable Mid Control

    $99.00
    1-Band: 1 Knob Mid/Mid Stack
    Control Configuration Mid/Mid Stack The EMG VMC is an active variable mid control EQ Circuit for bass and guitar. Rotate the upper control of the stacked pot clockwise for boost, counterclockwise for cut. Leave it in the center...
  31. Noll Mixpot Piezo and Magnetic Buffer

    $90.00
    Noll MixPot
    The MixPot 1 is a miniature onboard pickup mixing preamp, mounted to the underside of a balance pot (center click). The preamp allows the ability to combine Piezo and magnetic pickups, two magnetic pickups or two Piezo pickups without any additional...
  32. Bartolini TC1 Preamp

    $36.00
    TC Boost Preamp, Single Channel, Low Noise, 8X (18dB) Gain
    Bartolini TC1 Preamp TC Boost Preamp, Single Channel, Low Noise, 8X (18dB) Gain Specifications Module Size: 1.05" [26.7mm] Long, 0.79" [20.1mm] Wide, 0.43" [10.9mm] Thick Operating...
  33. Richter Passive Tone Control

    $17.16
    The passive tone pot is an additional element for BassXX products.
    Richter Passive Tone for BassXX Preamps The passive tone pot is an additional element for BassXX products. It is mounted on the basic circuit board of each BassXX-electronic.

Frequently Asked Questions

Question: Where Can I Buy Preamps?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter