{"id":6008,"date":"2014-07-28T09:00:00","date_gmt":"2014-07-28T14:00:00","guid":{"rendered":"http:\/\/www.bestbassgear.com\/ebass\/?p=6008"},"modified":"2016-10-14T13:07:19","modified_gmt":"2016-10-14T18:07:19","slug":"passive-tone-controls-explained","status":"publish","type":"post","link":"https:\/\/www.bestbassgear.com\/ebass\/repair\/passive-tone-controls-explained.html","title":{"rendered":"Passive Tone Controls Explained"},"content":{"rendered":"

What is a passive tone control?<\/h3>\n

A Passive Tone control is a low pass filter comprised of a three-way variable resistor (potentiometer), and a capacitor.<\/p>\n

How does a passive tone control work?<\/h3>\n

The passive tone control on your electric bass guitar is a subtractive device. The capacitor allows high frequencies to pass or be bled to ground, and the pot allows you to control the amount of signal delivered to the capacitor. A tone control can only reduce frequencies being let through and not add anything extra. In fact, where the tone control is commonly placed is commonly the cause of lackluster results.<\/p>\n

Can my bass have better use of the tone control?<\/h3>\n

Yes. The way in which many electric bass guitars have the passive tone control implemented is less than ideal for what this little circuit can accomplish. Using a Fender Jazz Bass as an example, the main issue is the placement of the tone control in the signal chain. A common Jazz Bass issue, as many owners are full aware, is that unless the neck pickup, bridge pickup, or both are at full volume the tone control “feels weak.” The reason for this is due to where the control is in the signal chain. The illustration below is the standard Jazz Bass wiring common to many if not all Jazz Bass models that utilize three controls.<\/p>\n

\"1\"<\/p>\n

Is there a better way of doing this?<\/h3>\n

Absolutely! The tone control can be changed out and replaced with a tandem tone pot, along with rewiring how the pickups are connected to the controls, resulting in much better control of your instrument’s overall tone. The illustration below is an example of how you can rewire your existing controls.<\/p>\n

\"2\"<\/p>\n

Where can I find this tandem tone pot?<\/h3>\n

Best Bass Gear currently stocks one version of this particular pot. It is available here:<\/p>\n

https:\/\/www.bestbassgear.com\/east-acg-passive-tone-control-module-only.htm<\/a><\/p>\n

This is not a stacked potentiometer, but rather a pot that has 6 connections and a single shaft. Using a tandem tone pot not only has benefits of allowing tone control on both neck and bridge pickup independently, but also allows two different capacitors to be used for each pickup. For example, you may want less high frequencies to come through on the neck pickup, but prefer more for the bridge pickup. In that is your goal, you may want to use a 0.047\u00b5F for the neck, and a 0.022\u00b5F for the bridge.<\/p>\n

What capacitor value<\/em> should I use?<\/h3>\n

<\/a>The answer to that question depends on what you are looking for out of your tone control.<\/p>\n

Using higher value capacitors shifts the frequency cutoff point, cutting further down into the upper midrange and heads towards the lower midrange.<\/p>\n

A lesser value moves the cutoff frequency point higher preserving more of the high midrange when the control is used.<\/p>\n

For an instrument with passive pickups, a good starting point is in the range of 0.022\u00b5F to 0.047\u00b5F. With active pickups such as EMGs, 0.1\u00b5F would work. From there, you can experiment with many different values to get a feel for what is possible and pleasing to your ears.<\/p>\n

What types<\/em> of capacitors should I use?<\/h3>\n

Electrolytic or tantalum capacitors are not recommended.<\/p>\n

Recommended capacitor types are Paper in Oil, Ceramic Disk, Mylar, or Poly-Film. There is no significant advantage or disadvantage to using one over another, as performance will be generally equal no matter which type you choose. The value<\/em> of the capacitor (as in its capacitance and not price) is more important than what the capacitor is constructed from.<\/p>\n","protected":false},"excerpt":{"rendered":"

What is a passive tone control? A Passive Tone control is a low pass filter comprised of a three-way variable resistor (potentiometer), and a capacitor. How does a passive tone control work? The passive tone control on your electric bass guitar is a subtractive device. The capacitor allows high frequencies to pass or be bled … Read more<\/a><\/p>\n","protected":false},"author":10,"featured_media":6006,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[12,7],"tags":[],"_links":{"self":[{"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/posts\/6008"}],"collection":[{"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/comments?post=6008"}],"version-history":[{"count":0,"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/posts\/6008\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/media\/6006"}],"wp:attachment":[{"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/media?parent=6008"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/categories?post=6008"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.bestbassgear.com\/ebass\/wp-json\/wp\/v2\/tags?post=6008"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}