Electronics
We carry a wide array of electronics and electronic components to provide either replacement for your failing electronics or allow you to finish the custom dream build that you are planning or working on. Everything from passive wiring harnesses, potentiometers, switches, jacks, shielding tape for your control cavity, capacitors, jack plates, battery clips, battery holders, and even wire and heat shrink tubing are available. If you require something that you do not see listed please feel free to contact us.
9 Item(s)
Frequently Asked Questions
Question: Where Can I Buy Electronics?
Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs
3 Way Switch - On Off On Mini Switch
$18.71On-Off-On Mini Switch, DPDT, With Mounting Hardware
On-Off-On Mini Switch, DPDT, With Mounting Hardware Specifications 5/16" thread bushing height 1/4" diameter hole 5/8" body cavity depth needed Knob portion is 12mm long2 Way Switch - On On Mini Switch
$14.85 - $18.43On-On Mini Switch, DPDT, With Mounting Hardware
On-On Mini Switch, DPDT, With Mounting Hardware3 Way Switch - On On On Mini Switch
$18.98On-On-On Mini Switch, DP3T, With Mounting Hardware
On-On-On Mini Switch, DP3T, With Mounting HardwarePure Tone Stereo Output Jack
$5.20 - $7.99*Stereo version for instruments with stereo outputs or active electronics*
Pure Tone Stereo Output Jack The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies...Pure Tone Mono Output Jack
$4.20 - $7.99Pure Tone Mono Output Jack The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a...NOLL 9 lug Stereo Jack
$14.00 - $20.00NOLL 9 lug Stereo Jack High quality ¼" stereo jack with 2 switches. Used for our parametric preamps and switching on a battery in an active system when a ¼" plug is inserted. Requires ⅜"-diameter mounting...Jack - Switchcraft Stereo Long Threaded Jack
$18.98 - $23.00Long Threaded Barrel Input Jack
Long Threaded Barrel Input Jack, Stereo, Gold, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo. 1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".NOLL Toggle Switch - 2-Pole On/On/On
$17.00 - $22.00NOLL Toggle Switch - 2-Pole On/On/On Flat toggle switches for series/parallel pickup switching, humbucker coil-tapping, phase switching and other special wirings. 1/4"-diameter mounting hole and 5/8" body cavity depth are required. Model:...