Jack & Control Plates
Will these Jack & Control Plates work with your Bass?
Ask Frankie, our Bass Tech.
8 Item(s)
Page: 1 of 1
Frequently Asked Questions
Question: Where Can I Buy Jack & Control Plates?
Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs
Pure Tone Stereo Output Jack
$5.20 - $7.99*Stereo version for instruments with stereo outputs or active electronics*
Pure Tone Stereo Output Jack The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies...Pure Tone Mono Output Jack
$4.20 - $7.99Pure Tone Mono Output Jack The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a...NOLL 9 lug Stereo Jack
$14.00 - $20.00NOLL 9 lug Stereo Jack High quality ¼" stereo jack with 2 switches. Used for our parametric preamps and switching on a battery in an active system when a ¼" plug is inserted. Requires ⅜"-diameter mounting...ElectroSocket
$8.70ElectroSocket Jackplate in Chrome, Black, and Gold
Allparts ElectroSocket jackplate with Screws Takes Switchcraft 1/4" Input Jack. Fits onto the standard 7/8"-diameter hole. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening. Chrome,...Jazz Control Plate
$24.20 - $26.40Jazz Bass Control Plate in Chrome, Black, or Gold
These are aftermarket replacement control plates intended for Fender Jazz basses equipped with a control plate, or your own custom Jazz Bass inspired creation. The three potentiometer holes are for 3/8"(9.52mm) diameter pot shafts such as CTS, and...Jack - Switchcraft Stereo Long Threaded Jack
$18.98 - $23.00Long Threaded Barrel Input Jack
Long Threaded Barrel Input Jack, Stereo, Gold, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo. 1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".Football Jack Plate
$8.40Metal "football" jack plate for Guitar & Bass
Football shaped, with screws. Jack hole diameter is 3/8" (9.5mm). The mounting screw holes spacing - 1-7/16" (36.5mm). The jack plate has a slight curve to match the body's curved sides.