Jack & Control Plates

Frankie - Bass Tech Will these Jack & Control Plates work with your Bass? Ask Frankie, our Bass Tech.

Frequently Asked Questions

Question: Where Can I Buy Jack & Control Plates?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter
  1. Richter JB-VBT Passive Control Plate with Solderless connections

    $79.95
    JB plate replacement for Jazz bass with Volume, Blend, Tone, with solderless connections
    Richter JB-VBT Preamp - JB plate replacement for Jazz bass The RICHTER JB PASSIVE control plate is an easy mounting component for passive bass guitars like the Jazz Bass TM. It provides a volume pot, an MN taper balance pot and one tone control...
  2. Pure Tone Stereo Output Jack

    $5.20 - $7.99
    *Stereo version for instruments with stereo outputs or active electronics*
    Pure Tone Stereo Output Jack The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies...
  3. Pure Tone Mono Output Jack

    $4.20 - $7.99
    Pure Tone Mono Output Jack The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a...
  4. Pure Tone Mono/Stereo 1/4in. Barrel Jack Nickel

    $9.99
    Long-threaded jack for mono ?and? stereo applications Nickel
    Pure Tone Mono/Stereo 1/4in. Barrel Jack 35 mm (1.38") threaded shaft length / 40 mm (1.57") overall shaft length. This new panel-mount jack boasts full contact for optimal signal and lowest possible noise. Greater surface...
  5. NOLL 9 lug Stereo Jack

    $14.00 - $20.00
    NOLL 9 lug Stereo Jack High quality ¼" stereo jack with 2 switches. Used for our parametric preamps and switching on a battery in an active system when a ¼" plug is inserted. Requires ⅜"-diameter mounting...
  6. ElectroSocket

    $8.70
    ElectroSocket Jackplate in Chrome, Black, and Gold
    Allparts ElectroSocket jackplate with Screws Takes Switchcraft 1/4" Input Jack. Fits onto the standard 7/8"-diameter hole. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening. Chrome,...
  7. Jazz Control Plate

    $24.20 - $26.40
    Jazz Bass Control Plate in Chrome, Black, or Gold
    These are aftermarket replacement control plates intended for Fender Jazz basses equipped with a control plate, or your own custom Jazz Bass inspired creation. The three potentiometer holes are for 3/8"(9.52mm) diameter pot shafts such as CTS, and...
  8. Jack - Switchcraft Stereo Long Threaded Jack

    $18.98 - $23.00
    Long Threaded Barrel Input Jack
    Long Threaded Barrel Input Jack, Stereo, Gold, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo. 1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".
  9. Football Jack Plate

    $8.40
    Metal "football" jack plate for Guitar & Bass
    Football shaped, with screws. Jack hole diameter is 3/8" (9.5mm). The mounting screw holes spacing - 1-7/16" (36.5mm). The jack plate has a slight curve to match the body's curved sides.
  10. Jack - Switchcraft Stereo Output Jack

    $6.83
    1/4 Output Jack
    1/4 Output Jack, Stereo, Switchcraft #12B, with nut and washer. A stereo output jack is used for stereo wiring, or to turn on/off onboard active systems when the plug is inserted. Requires 3/8"-diameter mounting hole; 3/8 x 32 threaded portion is 3/8"...
  11. Cruz Tools GrooveTech Jack and Pot Wrench

    $16.95
    The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
    Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...
  12. American Vintage 62 Jazz Bass 3-hole control plate

    $34.99
    3-Hole Jazz Bass Control Plate
    Jazz Bass control plate with three holes for controls. Perfect for building your own 62' Jazz Bass style passive control layout.
  13. Switchcraft Mono Jack

    $6.04
    Switchcraft #11 1/4" Mono Input Jack
    1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.

Frequently Asked Questions

Question: Where Can I Buy Jack & Control Plates?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter