Free shipping on US orders over $50 · In-stock orders usually ship within 1 business day · 877-839-3531
Shop the store
Tuners

Measuring Hipshot Ultralights (3/8" vs. 1/2")

Use this tip sheet if you need to need to figure out whether your Ultralights are the version known as 3/8” or 1/2”.

There are a couple methods:

  1. Remove a tuner and measure the hole that was drilled in the headstock.
    • a 3/8” tuner will have a hole that is 9/16” in diameter
    • a 1/2” tuner will have a hole that is 11/16” in diameter
  1. Measure the nut that secures the tuner to the headstock. We are looking for the distance from one side of the nut to the other parallel side.
    • a 3/8” tuner will measure roughly 9/16” across
    • a 1/2” tuner will measure roughtly 3/4” across

Parts for this job

Shop all →

Next stepShop tuning machinesIn-stock parts usually ship within 1 business day.
Shop now

Leave a comment

We only use your email if we need to reach you about your comment. Here's what else you should know:

  • Never publishedOnly your name shows with your comment. Your email stays with us.
  • No mailing listCommenting doesn't sign you up for anything. The newsletter is a separate opt-in.
  • A real person reads itEvery comment goes to the shop crew, the people who rewire and solder basses every week, and we answer the questions.
  • Spam-filteredEvery comment is screened by Akismet, so the threads stay useful.