Free shipping on US orders over $50 · In-stock orders usually ship within 1 business day · 877-839-3531
Shop the store
Articles

Handy Dandy Quick Guide For Decimal to Fractional and Back Again

When building your own bass, math is involved and there’s no way around it. You’re going to be measuring things and that’s just the way it is.

More often than not you’re going to have to deal with both statute (inches) and metric (millimeters) measurements when putting a bass together, so it’s good to know how to convert either to either as you’re putting your build together.

Here’s a quick guide you can refer to whenever you need to convert one to the other.

Have a fraction measurement and need a decimal? Divide the nominator (number on top) by the denominator (number on bottom). Which conveniently is exactly what it looks like you should do with a fraction.

Example: 11/16 = 0.6875″

Need that same measurement in millimeters? Multiply by the number of millimeters in an inch, 25.4.

Example 0.6875″ x 25.4 = 17.4625mm (slightly less than 17.5mm)

Starting with metric instead? Reverse it and divide by 25.4.

Example: 16mm / 25.4 = 0.629″

Need that in fractional inches? Multiply by your desired denominator. The result is the nominator.

Example: 0.629″ x 8 = 5.032 so slightly greater than 5/8″.

And yes, when converting inches to millimeters and vice versa, you’re going to run into “slightly” often. Converting 16mm to inches is a good example of this because you’re technically getting 5.032/8ths of an inch.

Next stepShop bass partsIn-stock parts usually ship within 1 business day.
Shop now

2 thoughts on “Handy Dandy Quick Guide For Decimal to Fractional and Back Again”

  1. … which is why the metric system makes more sense! You don’t have any stupid fractions! And who decided that inch goes to foot goes to yards goes to miles? The metric system goes by tens and is SOOO much easier!

    Reply

Leave a comment

We only use your email if we need to reach you about your comment. Here's what else you should know:

  • Never publishedOnly your name shows with your comment. Your email stays with us.
  • No mailing listCommenting doesn't sign you up for anything. The newsletter is a separate opt-in.
  • A real person reads itEvery comment goes to the shop crew, the people who rewire and solder basses every week, and we answer the questions.
  • Spam-filteredEvery comment is screened by Akismet, so the threads stay useful.