Free shipping on US orders over $50 · In-stock orders usually ship within 1 business day · 877-839-3531
Shop the store
Repair & Installation

How to build a bass guitar – routing the control cavity part 3

In this step we finish up (yes, really!) the routing of the control cavity – and this is where we see all three bits get into action.

Below: Using the second bit (3/4-inch), adjusted for next pass.

IMG_1900

Below: Pass with 3/4-inch bit completed.

IMG_1902

Below: Adjustment made using same bit for next pass.

IMG_1903

Below: Pass completed.

IMG_1904

Below: Longest bit now used (1.25-inch), adjusted for 1st pass.

Note: This is typically the least-used bit in guitar building (as you can tell by how good the bit looks,) but it is still necessary to use.

IMG_1905

Below: Second and final cut, full depth with long bit.

IMG_1906

Below: Pass completed.

IMG_1907

Below: Template is removed (unscrewed from the body since it was physically attached to it.)

IMG_1908

Below: Done!

IMG_1909

Where are the rest of the build steps?
You can view them all here.

Parts for this job

Shop all →

Next stepShop tools and partsIn-stock parts usually ship within 1 business day.
Shop now

Leave a comment

We only use your email if we need to reach you about your comment. Here's what else you should know:

  • Never publishedOnly your name shows with your comment. Your email stays with us.
  • No mailing listCommenting doesn't sign you up for anything. The newsletter is a separate opt-in.
  • A real person reads itEvery comment goes to the shop crew, the people who rewire and solder basses every week, and we answer the questions.
  • Spam-filteredEvery comment is screened by Akismet, so the threads stay useful.