Free shipping on US orders over $50 · In-stock orders usually ship within 1 business day · 877-839-3531
Shop the store
Repair & Installation

How to build a bass guitar – Body edge roundover

For this step, there are basically two ways of getting it done. The first way is by hand, and the second way is using what’s known as a roundover bit. What will be shown here is how it’s done using the latter.

Below: This is where we left off last time. All the body edges are squared off.

IMG_4776

Below: Another angle showing how squared off the corners currently are.

IMG_4777

Below: The bit to be used, a 5/8-inch radius roundover bit. Yes, this does mean the rounded edges will have a radius of 5/8-inch.

IMG_4778

Below: Making the first pass.

IMG_4780

Below: The bit is raised in preparation for the second pass.

IMG_4834

Below: Making the second pass.

IMG_4841

Below: Back of the body after the pass.

IMG_4857

Below: Rounding off the edges on the front of the body.

IMG_4936

Below: Work is completed.

IMG_4938

Additional notes:

In the way the passes were done on this build, the router was simply run around the body. However, there is the school of thought that states running a router around the body in a single pass is a bad idea and could result in wood tear-out. The suggestion is to have planned series of passes. This article explains how to do that. (It is a very long read, but worth your time.)

Which is better, shaping by router or by hand?

Ultimately, this is the builder’s preference. Using the router is obviously faster but not necessarily better. With the router, you are accepting the radius of the bit as your finalized rounded edge around the entire body, whereas shaping by hand allows the edge to be wider, taller, shorter or more skinny for wherever you feel it is appropriate.

There is also the philosophical argument that shaping by hand makes the instrument “feel more real” to the builder once completed. Whether it does or does not is a question you have to answer yourself.

As always, please be safe whenever cutting and shaping wood, and follow these instructions on this page at your own risk.

Where are the rest of the build steps?
You can view them all here.

Parts for this job

Shop all →

Next stepShop tools and partsIn-stock parts usually ship within 1 business day.
Shop now

1 thought on “How to build a bass guitar – Body edge roundover”

  1. Routers are super dangerous tools and need to be used with great respect. (can’t be overstated) Having said that, they are a necessity for an instrument maker – a very useful tool.

    Reply

Leave a comment

We only use your email if we need to reach you about your comment. Here's what else you should know:

  • Never publishedOnly your name shows with your comment. Your email stays with us.
  • No mailing listCommenting doesn't sign you up for anything. The newsletter is a separate opt-in.
  • A real person reads itEvery comment goes to the shop crew, the people who rewire and solder basses every week, and we answer the questions.
  • Spam-filteredEvery comment is screened by Akismet, so the threads stay useful.