 Leo Quan products are temporarily not being manufactured and we are not aware of when they will again be available.
Our desire is not just to sell you parts, but to sell you the right parts for what you need… to that end we have put together this chart that offers suggestions for comperable bridges that we have available…
Please note: most Fenders will use the Badass II while newer American made Fenders (roughly 2003 to present) will use the Badass III. There are, however, exceptions that exsist and we are here to help with that – just shoot us an email at: sales@bestbassgear.com and we can assist you in choosing the right bridge for your project. * These bridges are not a direct Fender replacement, they use their own mounting hole pattern. ** Babicz Full Contact Hardware makes a 5 string bridge ~ please double check the mounting hole pattern for your particular project. |
||||||||||||
I’m looking to upgrade my factory bridge on my Jackson JS2. I looking at a high mass one. I just don’t know which one will fit. I don’t want to be drilling if possible. Is there one that will fit into existing holes? I am trying to get more sustain. I have tried multiple pickup heights. It’s set up too factory specs. Action, action string heights. Only thing is I changed from the factory gauge 45-105s too 50-115’s and had it set up. Sustain stayed the same now I want to upgrade the bridge. The one that’s on it is very small and I have researched gaining sustain and I have found that suggests getting a lager bridge. So if you can point me to a bridge that will be basically plug and play. Except for having to reset saddle heights string height pickup height I realize those forementioned things will all have to be redone. I can do all that on my own. I do all my own set-ups any way because I know how I want it set-up and trying to convey that to a tech has had me getting a setup done only to having them try doing it again. T be how I want it short of sitting in the shop while they’re doing it. If I do it myself, I get each individual point exactly where I want it first time. I mean I need one that will match mounting holes and recess that’s already on bass. Thanks for the assistance..
I’m looking to upgrade my factory bridge on my Jackson JS2. I looking at a high mass one. I just don’t know which one will fit. I don’t want to be drilling if possible. Is there one that will fit into existing holes? I am trying to get more sustain. I have tried multiple pickup heights. It’s set up too factory specs. Action, action string heights. Only thing is I changed from the factory gauge 45-105s too 50-115’s and had it set up. Sustain stayed the same now I want to upgrade the bridge. The one that’s on it is very small and I have researched gaining sustain and I have found that suggests getting a lager bridge. So if you can point me to a bridge that will be basically plug and play. Except for having to reset saddle heights string height pickup height I realize those forementioned things will all have to be redone. I can do all that on my own. I do all my own set-ups any way because I know how I want it set-up and trying to convey that to a tech has had me getting a setup done only to having them try doing it again. T be how I want it short of sitting in the shop while they’re doing it. If I do it myself, I get each individual point exactly where I want it first time. I mean I need one that will match mounting holes and recess that’s already on bass. Thanks for the assistance. I really do appreciate your help.