Free shipping on US orders over $50 · In-stock orders placed by noon ET ship the same day · 877-839-3531
Shop the store
Repair & Installation

How to build a bass guitar – Cutting the nut slot and prepping the nut blank part 2

This is a contiuation from part 1.

Below: The file is now being used to smooth the nut channel. All rough edges left behind from the chisel will be smoothed out.

Below: The finished nut channel

Below: The current blank is oversized, which in this case is good because it can be cut down to size.

Below: A scrap piece of plywood to be used to help with setting the thickness of the blank. The blank itself is far too small for the machine on its own, so it will be taped to the plywood so it can be safely passed through.

Below: Tape is applied which will be removed to leave behind adhesive to apply the blank to.

Below: Tape removed, leaving adhesive behind, blank is then pressed to the the adhesive on the board.

Below: Blank is being run through the sander. 80-grit sanding paper is being used. This is the sander being used https://www.rockler.com/jet-drum-sander-1-75hp-w-open-stand

Below: The calipers are used to check the depth.

Below: Checking channel width and taking a measurement.

Below: After another pass with the sander, the blank is then given some fine sanding by hand to achieve the perfect fit.

Below: The blank now fits in the slot correctly.

Where are the rest of the build steps?
You can view them all here.

Parts for this job

Shop all →

Next stepShop tools and partsIn stock parts ship the same day when ordered by noon ET.
Shop now

Leave a comment

We only use your email if we need to reach you about your comment. Here's what else you should know:

  • Never publishedOnly your name shows with your comment. Your email stays with us.
  • No mailing listCommenting doesn't sign you up for anything. The newsletter is a separate opt-in.
  • A real person reads itEvery comment goes to the shop crew, the people who rewire and solder basses every week, and we answer the questions.
  • Spam-filteredEvery comment is screened by Akismet, so the threads stay useful.