spacer
















spacer

QUICK LINKS

Pots | Jacks | Jackplates | Battery Terminals | Battery Holders | Capacitors

Wire | Heat Shrink | Shielding | Switches

Potentiometers

Noble 250k Volume or Tone Potentiometer Click here for dimensions

250k Audio Taper Volume or Tone Potentiometer. 6mm split-knurled shaft.



Noble 250k Volume or Tone Pot $5.75


CTS 250k Volume Potentiometer

250k Audio Taper Volume or Tone Potentiometer. Solid 1/4" Shaft. Thread 3/8" x 32



CTS 250k Volume or Tone Pot $6.00


250k Volume Push/Pull Potentiometer Click here for dimensions

250k Audio Taper Volume or Tone Potentiometer with DPDT Push/Pull switch. Switch function can be used for Active-Passive bypass, Tone selection, or pickup selector. 6mm split-knurled shaft.



250k Volume or Tone Push/Pull Pot $12.00


250k Volume/Volume or Volume/Tone Stacked Potentiometer

250k Audio Taper Volume/Volume or Volume/Tone stacked control. Solid 6mm upper shaft, 8mm lower shaft.



250k Volume/Volume or Volume/Tone Stacked Pot $20.00


250k Volume/Volume Stacked Potentiometer

This potentiometer design is for various space-saving applications.

Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is 6mm lower, 4mm upper.

20mm body cavity depth is required.



250k Volume/Volume Stacked Pot $18.00


250k Volume/Tone Stacked Potentiometer

This potentiometer design is for various space-saving applications. 250KB Volume + 250KA Tone Stacked Control

Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is 6mm lower, 4mm upper.

20mm body cavity depth is required.



250k Volume/Tone Stacked Pot $18.00


250k Tone/Tone Stacked Potentiometer

This potentiometer design is for various space-saving applications, depending on the resistance value and taper.

250KA Stacked Tone Control

Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is 6mm lower, 4mm upper.

20mm body cavity depth is required.



250k Tone/Tone Stacked Pot $18.00


500k Volume Potentiometer Click here for dimensions

500k Audio Taper Volume or Tone potentiometer. Split-knurled 6mm shaft.



500k Volume or Tone Pot $4.00


500k CTS Volume Potentiometer

500k Audio Taper Volume or Tone potentiometer. Split-knurled 24-spline 6mm shaft. Height 3/8" (9.52mm). Thread 3/8" x 32



500k Volume or Tone Pot $6.00


500k Volume Push/Pull Potentiometer Click here for dimensions

500k Audio Taper Volume or Tone Potentiometer with DPDT Push/Pull switch. Switch function can be used for Active-Passive bypass, Tone selection, or pickup selector. 6mm split-knurled shaft.



500k Volume or Tone Push/Pull Pot $9.00


250K Volume/Volume Push/Pull Potentiometer

This potentiometer design is for various space-saving applications, depending on the resistance value and taper.

Its on-on double pole push-pull section can control pickup switching or active-passive switching for electronic circuits.

250KB Stacked Volume Control (Push/Pull)

Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is 4mm upper, 6mm lower.

20mm body cavity depth is required.



250k Volume/Volume Push/Pull Stacked Pot $20.00


250K Volume/Tone Push/Pull Potentiometer

This potentiometer design is for various space-saving applications, depending on the resistance value and taper.

Its on-on double pole push- pull section can control pickup switching or active-passive switching for electronic circuits.

250KB Volume + 250KA Tone Control (Push/Pull)

Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is 4mm upper, 6mm lower.

20mm body cavity depth is required.



250k Volume/Tone Push/Pull Stacked Pot $20.00


250K Tone/Tone Push/Pull Potentiometer

This potentiometer design is for various space-saving applications, depending on the resistance value and taper.

Its on-on double pole push-pull section can control pickup switching or active-passive switching for electronic circuits.

2x 250KA Tone Control (Push/Pull)

Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is 4mm upper, 6mm lower.

20mm body cavity depth is required.



250k Tone/Tone Push/Pull Stacked Pot $20.00


25K Volume or Tone Potentiometer  Click here for dimensions

25k Audio Taper Volume or Tone pot for use with active pickups like EMG's and others.



25k Volume or Tone Pot $4.00


25K Stacked EMG Volume/Volume or Volume/Tone Potentiometer

Solderless 25k Stacked Volume/Volume or Volume/Tone EMG® Potentiometer.

Comes with Concentric knob set, output jack, interconnecting cables, and allen key.

Solid 8mm lower shaft, 6mm upper shaft.



25k Solderless Volume/Volume or Volume/Tone Stacked Pot $20.00


25K Stacked EMG Volume/Volume or Volume/Tone Potentiometer

25k Stacked Volume/Volume or Volume/Tone EMG® Potentiometer.

Comes with Concentric knob set, capacitor, and allen key.

Solid 8mm lower shaft, 6mm upper shaft.



25k Soldered Volume/Volume or Volume/Tone Stacked Pot $20.00


25K Volume Push/Pull Potentiometer  Click here for dimensions

25k Push/Pull Volume pot with DPDT switch for use with active pickups like EMG's and others. Switch function can be used for Active-Passive bypass, Tone selection, or pickup selector.



25k Volume Push/Pull Pot $12.00


25K Stacked EMG Volume/Volume or Volume/Tone Potentiometer

25k Stacked Volume/Volume or Volume/Tone EMG® Potentiometer.

Comes with Concentric knob set, capacitor, and allen key.

Solid 8mm lower shaft, 6mm upper shaft.



25k Soldered Volume/Volume or Volume/Tone Stacked Pot $20.00


25K EMG Volume Push/Pull Potentiometer

25k EMG Solderless DPDT Push/Pull Pot. 6mm shaft.

For use with EMG® pickups including the 35, 40, & 45 TW and TWX pickups that require a push/pull pot.



25k Solderless EMG Volume Push/Pull Pot $20.00


Noll 50k Stacked Tone/Tone Push/Pull Potentiometer

This potentiometer design is for various space-saving applications, depending on the resistance value and taper.

Its on-on double pole push-pull section can control pickup switching or active-passive switching for electronic circuits.

2x 50KB Active Tone Control

Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is 4mm upper, 6mm lower.

20mm body cavity depth is required.



50k Tone/Tone Push/Pull Stacked Pot $20.00


BBG No-Solder Blend Potentiometer

A new original for Best Bass Gear. Here is a 250k blend control mounted to a small circuit board with screw down wire connections.

As a result it is a very easy part to install as a retrofit for virtually any bass electronics system or for creating a bass electronics system up from scratch.

It works well in active systems (with passive pickups) and is ideal for fully passive systems.



250k No-Solder Blend Pot $50.00


250k Blend Potentiometer Click here for dimensions

250k Blend Potentiometer with center detente for use with passive pickups.



250k Blend Pot $8.00


Noll 250k Blend Potentiometer

This special positive/negative audio taper potentiometer allows to combine and blend 2 magnetic pickups without any loss of sound in center click position.

The PC board allows for easy solder work.

Threaded section is M7 x 0.75, Length is 10mm, Solid Shaft is 6mm diameter, Length is 10mm.

Cavity depth of 16mm is required.



250k Blend Pot $12.00


25k Blend Potentiometer

25k Blend Potentiometer with 6mm split-knurled shaft. Intended for use with active pickups like EMG® and others.



25k Blend Pot $8.00


25k Blend Potentiometer

EMG® 25k Blend Potentiometer. Board mounted with solder connections.Intended for use with active pickups like EMG® and others.

Please Note:

This is not the EMG ABC Control.

EMG ABC Control is available here



EMG 25k Blend Pot $20.00


Noll 500k/220k Stacked Volume/Blend Control

This potentiometer design is for various space-saving applications.

500KB Volume/ 220KA+220KC Blend Stacked Control

Threaded section is M10 x 0.75, Length 10mm, Solid Shaft 4mm upper, 6mm lower.

Cavity depth of 27mm required.



500k/220k Volume/Blend Stacked Pot $21.00


Noll 50k/100k Stacked Volume/Blend Control

This potentiometer design is for various space-saving applications.

50KB /100KB+100KB Stacked Control for active use

Threaded section is M10 x 0.75, Length 10mm, Solid Shaft 4mm upper, 6mm lower.

Cavity depth of 27mm required.



50k/100k Volume/Blend Stacked Pot $21.00


Noll 500k/220k Volume/Blend Push/Pull Stacked Pot

This potentiometer design is for various space-saving applications.

Its on-on double pole push-pull section can control pickup switching or active-passive switching for electronic circuits.

Threaded section is M10 x 0.75, Length 10 mm, Solid shaft 4mm lower, 6mm upper.

4 mm body cavity depth are required.



500k/220k Volume/Blend Push/Pull Stacked Pot $22.55


Noll 500k/220k Volume/Blend Push/Pull Stacked Pot

This potentiometer design is for various space-saving applications, depending on the resistance value and taper.

Its on-on double pole push-pull section can control pickup switching or active-passive switching for electronic circuits.

Threaded section is M10 x 0.75, Length 10 mm, Solid shaft 4mm lower, 6mm upper.

4 mm body cavity depth are required.



50K/100K Volume/Blend Push/Pull Stacked Pot $22.55


50k EQ Potentiometer Click here for dimensions

Noble 50k Linear Taper EQ Pot with center detente. Intended for use with active systems.



Noble 50k EQ Pot $4.00


50k Stacked EQ Potentiometer Click here for dimensions

Noble 50k Stacked Linear Taper EQ Pot with center detente. Intended for use with active systems.



Noble 50k EQ Pot $18.00


50k Push/Pull EQ Potentiometer Click here for dimensions

Noble 50k Push/Pull Linear Taper EQ Pot with center detente. Intended for use with active systems.



Noble 50k Push/Pull EQ Pot $18.00


50k Stacked EQ Potentiometer

Noble 25K Stacked EQ Pot for OBP-1 Treble/Bass Stack with no detente. 8mm lower shaft, 6mm upper shaft



Noble 25k Stacked EQ Pot for OBP-1 $20.00


Delano Hybrid Treble Pot

Delano Hybridg Treble/Passive Tone control pot. 50k Linear Taper for EQ, 250k for passive tone. Center detente with 6mm solid shaft.

Intended for use with Delano Sonar 2 & Sonar 3-band preamps.



Delano Hybrid Control Pot $12.00


Jacks

Switchcraft Stereo Jack

1/4 Output Jack, Stereo, Switchcraft #12B, with nut and washer.

A stereo output jack is used for stereo wiring, or to turn on/off onboard active systems when the plug is inserted.

Requires 3/8"-diameter mounting hole; 3/8 x 32 threaded portion is 1/4" long.



Switchcraft Stereo Jack $3.00


Switchcraft Mono Jack

1/4 Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole; 3/8 x 32 threaded portion is 1/4" long.



Switchcraft Mono Jack $2.85


Switchcraft Mono Jack

Long Threaded Barrel Input Jack, Stereo, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo.

1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".



Chrome $9.50
Black $13.00
Gold $14.00


Jackplates

Switchcraft Mono Jack

Football shaped with mounting screws. Jack hole diameter is 3/8" (9.5mm).

The mounting screw holes spacing - 1-7/16" (36.5mm). The jack plate has a slight curve to match the body's curved sides.



Chrome $5.50
Black $6.00
Gold $6.50


Battery Terminals

Switchcraft Mono Jack

Single 9v Battery clip for use on active systems. Use two wired in series for 18v.



Battery Clip $1.60


Switchcraft Mono Jack

Single 9v Battery clip for use on active systems. Use two wired in series for 18v.



Battery Clip $1.60


Battery Holder

Battery Holder

Single 9v Battery holder for rear mounted control cavities.



Battery Holder $2.50


Capacitors

Sprague Capacitors

Sprague capacitors for passive tone controls.



.022µF $3.00
.033µF $3.00
.047µf $6.50
.068µf $3.50
.1µf $4.50


Wire

Wire

Sold by the foot.



White Wire $1.00
Black Wire $1.00


Heatshrink

Sold in 3" sections. Highly recommended for insulating bare wire connections.

1/16" Diameter is good for wire to wire connections.

1/8" Diameter is good for wire to jack lug connections.



1/16" Diameter $.25
1/8" Diameter $.25


Copper Shielding

Shielding


Copper shielding tape. Ideal for shielding control cavities, and control plates. Sold in 1" x 5' rolls.



Copper Shielding Tape $6.00


Switches

Switches

2-Way On-On DPDT switches. Ideal for use as coil splitting switches, series/parallel switches, and active/passive switches



Aguilar Round Bat Black Switch $15.00
Flat Switch (Chrome) $8.50
Flat Switch (Black) $13.00
Flat Switch (Gold) $16.00


Switches

3-Way On-On-On DPDT switches. Ideal for use as coil selecting switches, and any other applications that require a 3-way switch.



Flat Switch (Chrome) $13.50
Flat Switch (Black) $15.25
Flat Switch (Gold) $16.50


Switches

4-Pole 4PDT On-On switch. Ideal for handling series/parallel, or coil splitting on two soapbar pickups simultaneously.



Round Bat (Chrome) $12.50


Switches

4-Pole 4PDT On-On-On switch. Ideal for handling coil selecting two soapbar pickups simultaneously.



Round Bat (Chrome) $33.00