spacer

















spacer

PREWIRED PASSIVE HARNESSES

Volume - Tone
Prewired with wire lengths for P Bass, using standard pickguard,
unless specified otherwise in checkout message

1 Pickup - 2 knob configuration

Contains:
- 1 Audio Taper 250K Pot (Noble)
- 1 Audio Taper 250K Pot (Noble) w/Capacitor (Sprague Orange Drop .047)
- 1 Standard Stero Jack (Switchcraft)

Vol-Tone - $34   -   [ Add to cart ]



Volume - Volume - Tone
Prewired with wire lengths for J Bass, using standard electronics cavity cover,
unless specified otherwise in checkout message

2 Pickup - 3 knob configuration

Contains:
- 2 Audio Taper 250K Pot (Noble)
- 1 Audio Taper 250K Pot (Noble) w/Capacitor (Sprague Orange Drop .047)
- 1 Standard Stero Jack (Switchcraft)

Vol-Vol-Tone - $38   -   [ Add to cart ]



62' Jazz Bass Prewire
Pre-wired on our bench for you with everything built onto the control plate. Just connect your bridge ground and pickups and go. This classic configuration gives you a dedicated volume and tone for each pickup via vintage style chrome and black stacked knobs. The chrome upper is the volume. The black lower is the tone. Also included is the 'clicking' washer and 'dimpled' lower knob so the lower tone knobs click just like the original 62 Jazz. This makes it easy to find your settings, and the they stay put after being set.

2 Pickup - 2 knob configuration

Contains:
- American Vintage 62 Jazz Bass 3-hole control plate, with 3 chrome screws - 2 American Vintage 62 Jazz Bass CTS concentric 250/500K solid shaft potentiometer
- 2 American Vintage 62 Jazz Bass upper control knob
- 2 American Vintage 62 Jazz Bass lower control knob
- 2 American Vintage 62 Jazz Bass detent spring plate
- Switchcraft Mono Jack
- .047 µfd Orange Drop Capacitor
- .033 µfd.Orange Drop Capacitor
- Vintage Style Cloth Covered vintage style push back, 22 gauge, unshielded, single conductor wire.

62' Complete Prewire - $108   -   [ Add to cart ]



Volume - Volume - Tone - Tone
Prewired

2 Pickup - 4 knob configuration

Contains:
- 2 Audio Taper 250K Pot (Noble)
- 2 Audio Taper 250K Pot (Noble) w/Capacitor (Sprague Orange Drop .047)
- 1 Standard Stero Jack (Switchcraft)

Vol-Vol-Tone-Tone - $45   -   [ Add to cart ]



Volume - Blend - Tone
Prewired with wire lengths for J Bass, using standard electronics cavity cover,
unless specified otherwise in checkout message

2 Pickup - 3 knob configuration

Contains:
- 1 Audio Taper 250K Pot (Noble)
- 1 250K Blend Pot (Noble)
- 1 Audio Taper 250K Pot (Noble) w/Capacitor (Sprague Orange Drop .047)
- 1 Standard Stero Jack (Switchcraft)

Vol-Blend-Tone - $42   -   [ Add to cart ]



Volume - Blend - Tone - Tone
Prewired

2 Pickup - 4 knob configuration

Contains:
- 1 Audio Taper 250K Pot (Noble)
- 1 250K Blend Pot (Noble)
- 2 Audio Taper 250K Pot (Noble) w/Capacitor (Sprague Orange Drop .047)
- 1 Standard Stero Jack (Switchcraft)

Vol-Blend-Tone-Tone - $49   -   [ Add to cart ]




Prewiring is done every couple of days. Typical wait is just 2-3 weeks before leaving our shop.

Shipping Note on Prewired Units:

Prewired units are created based on your individual order.

This means that our technicians are custom wiring your order within days of completing your order with Best Bass Gear.

If you choose expedited shipping options that does not expedite the time taken to custom wire your particular item.