Aero Type 1 PE and Type 1 PJ4-B P/J Pickup Set
The Type 1 PE Bass is a replacement pickup for 4-String Fender Precision Basses, and other P-basses. These utilize Alnico V magnet's and are built by hand to provide the highest quality available for P-bass.
These are wound like the original P-bass pickups
This pickup is intended for 19.00mm bridge spacing.
The Type 1 PJ4-B is a 'long' sized Jazz bass pickup intended for the bridge position on 4-string Jazz basses. These are a P-bass pickup in a J-bass shell with a split coil humcancelling coil structure that utilizes Alnico V magnets.
This pickup is intended for 19.80mm neck spacing.
Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
- Length = 2.20"(56mm) Width = 1.08"(28mm)
- Length = 3.73"(95mm) Width = 0.73"(19mm)
Aero does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.