Lusithand 800BMF Preamp

The 800BMF differs from the 800BM by having an Active Blend and Master Volume control, making this a fully featured preamp.(not suitable for active/passive operation)

This tone stack has some serious high-frequency power and a very deep bottom end, just like the amplifier it's based on, allowing you to explore different tones directly from your instrument.

The Hi-mid and Treble controls are highly interactive; the same goes for the Lo-Mid and Bass controls and the overall sound is always very "cut through" and clear sounding.

For a stripped-down version of the 800BMF, check the 800BM.

Treble: Boost and cut around 4khz

Hi- Mid: Boost and cut at around 1khz

Bass: Boost and cut at around 60Hz

Lo- Mid: Boost and cut at around 250Hz

Contour switch: EQ pre-shape (V)

Active Balance board: active blend control + master volume

(!!Knobs Sold separately!!)

Active controls:
• Stacked Bass/Treble
• Stacked Hi-mid/Lo-mid
• Contour switch
• Active Balance + Master Volume
• Voltage: 9 to 27VDC
• Current Draw: +- 3mAh (9v)

All preamps are solderless