The 59J-LN1 is theJazz Bass® ( J Bass® ) replacement 'long neck' pickup for the neck position. NOTE: For J Bass instruments where both the neck and bridge pickup lengths are equal, the 'long neck' is especially designed for the neck position. It is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a split coil design.
The "original series" bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
*Note: String spacing over the neck pickup should be 64mm or larger. If not, there may be dropout on the D string. If your string spacing is less than 64mm, consider using a single coil pickup.
- Length = 3.73"(95mm) Width = 0.73"(19mm)
Please Note:Bartolini does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.