The G66CBJD B1/T1 is a G6 shape soapbar set with both neck position and bridge position pickups. The dual in-line (hum-cancelling) design features deep tone, strong lowsThe "Classic Bass" series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more "air" and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
Will work with string widths 96 to 102 mm measured over the pickup
Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
- Length = 5.53"(141mm) Width = 0.93"(24mm)
Please Note:Bartolini does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.