The M34C-T is an M3 Soapbar shaped bass pickup for the bridge position.The dual coil design features deep tone.The "original series" bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
- Length = 3.50"(89mm) Width = 1.50"(38mm)
Please Note:Bartolini does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.
Bass as a hobby.
By Brent Jones from on 12/26/2013
and the tone control is now usable as it had little affect on the tone with the stock pick-up.