The X44J B1/T1 is an X4 shape soapbar set with both neck position and bridge position pickups. The split coil design features deep tone.
The "original series" bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
- Length = 4.14"(105.16mm) Width = 0.87"(21.97mm)
Please Note:Bartolini does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.