The XXM45M-T is an M4 Soapbar shaped bass pickup for the bridge position.The split coil design features a deep tone.The pickup is designed for extended string width of 64 to 80mm in low-curvature fingerboards.
The "original series" bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
- Length = 4.00"(101.60mm) Width = 1.50"(38.10mm)
Please Note:Bartolini does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.