- Home /
- Bass Pickups /
- Seymour Duncan Vintage Pickups
DESCRIPTION
We are not authorized to ship Seymour Duncan products outside of the United States and Canada.
SCPB-1 '51 Tele® Bass
Vintage-correct true single-coil; a tribute to the old early-'50s "Tele Bass." Uses the same bobbins, magnets, wire, and black yarn for the same look and same bright tone as the original. Comes with waxed cloth hookup cable.
Dimensions: Length = 2.868"(72.8mm) Width = 0.766"(19.5mm)
SJ5S "American Standard" Jazz V
This pickup captures the tone, feel and articulation of a great '62 Jazz Bass. We adjusted the coil geometry and winding configuration to compensate for the different nature of extended range instruments. It's now possible to capture the subtle characteristics of traditional "J-tone" all the way down to the low "B." Includes logo cover.
This pickup is a direct retrofit for Fender™ Jazz V and many other popular 5 string basses. Will accommodate string spacings up to 3.10" (78.7mm) for bridge pickup and 3.00" (76.2mm) for neck pickup.
- Neck Pickup: Length = 3.973"(101mm) Width = 0.73"(18.54mm)
- Bridge Pickup: Length = 4.100"(104.1mm) Width = 0.73"(18.54mm)
SJB-1 Jazz Bass
This pickup gives you the traditional sound of a vintage pickup for Jazz Bass™. The single coil construction brings out the warmth and fullness of the instrument while maintaining clarity and definition. The neck version is reverse wound/reverse polarity (RW/RP) to create a humbucking effect when used together with the bridge model. The bridge model is specially calibrated for the bridge position where there is less string excursion.
- Neck Pickup: Length = 3.602"(91.5mm) Width = 0.718"(18.2mm)
- Bridge Pickup: Length = 3.715"(94.4mm) Width = 0.718"(18.2mm)
STK-J1 Jazz Bass Stack
Vintage-voiced humcancelling Stack ® pickup. This is one of our most popular pickups. It captures the same great tone, presence and response of the SJB-1 Vintage single coil, but without the annoying hum. Comes with four-conductor hookup cable.
- Neck Pickup: Length = 3.60"(91.4mm) Width = 0.76"(19.3mm)
- Bridge Pickup: Length = 3.705"(94.1mm) Width = 0.716"(19.3mm)
SPB-1Split-P
In 1957, Leo Fender changed the Precision Bass™ guitar pickup to a two coil system wired together to eliminate interference hum. He also used two pole pieces for each string to capture the greater string excursion of the bass guitar. This pickup delivers the distinctive smooth output, increased treble and full midrange of the original. Classic dual coil P-Bass, circa '57-'62.
Dimensions: Length = 2.20"(56mm) Width = 1.08"(28mm)
Please Note:Seymour Duncan supplies chrome screws with their pickups. If you require black or gold screws, we carry them on our pickup screws page.
Question: Where Can I Buy a Seymour Duncan Vintage Pickup?
Answer: You can buy this from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com