- Home /
- Prewired Passive Harness (Volume/Tone Stack, Blend) Solderless
DESCRIPTION
Solderles Volume / Passive Tone Stack - Blend
Control Configuration
- Volume/Passive Tone Stack
- Blend
Description
The pickup and ground conections are mader to the prewired harness with screw terminals, using a small (included) screwdriver.
This 2 control passive prewire is intended for instruments with 2-pickups, and a single tone control like the G&L SB2 ® bass.
These prewires are built in house by hand and utilize high quality Noble 250k Audio Taper Potentiometers, AVX Axial 0.047µF capacitors, and Standard Switchcraft Jack.
The Noble pot shafts are 6mm splined, split-knurled shaft. These can be converted to 1/4" if necessary using brass pot sleeves.
Please Note:
The prewire is built with wire lengths of about 6" which is more than enough for a P-Bass ® Bass utilizing the standard control plate. If a different length is required, please specify on your order comments. Different capacitor values can be used by request
Question: Where Can I Buy a Prewired Passive Harness (Volume/Tone Stack, Blend) Solderles?
Answer: You can buy this from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com