Hardware

The Zero Mod Thumb Rest for 4 string US Made Sterling Stingray Bass
Zero Mod US MadeSterling Stingray 4 String Thumb Rest Clear From Zero Mod: Do you want that fat meaty sound you get from the "P Bass/Jazz Bass" fingering positions? Do you have misgivings about drilling holes in your US Made...

The Zero-Mod Thumb Rest for Fender® Jaguar basses
Zero Mod Jaguar Bass Thumb Rest In response to demand, we now offer the Zero-Mod Thumb Rest for Fender® Jaguar Basses. This requires NO modification to your Jaguar Bass, and gives you the range and reach of the classic Fender rest....

Pickup mounting screws (8 pcs.) in Black, Chrome or Gold - 1¼" long. Some manufacturers supply pickup screws with their pickups, some do not...
Pickup mounting screws (8 pcs.) for bass, 1-1/4" long. Available in Black, Chrome, or Gold finish. Some manufacturers supply pickup screws with their pickups, some do not...

Add the finishing touch to your through body bass with Hipshot string ferrules. Available in chrome, black, and gold.
Add the finishing touch to your through body bass with Hipshot string ferrules. Available in chrome, black, and gold.

Solid brass bass thumbrest. Fits Fender Bass models. Includes mounting screws.
Machined out of solid brass. Hand polished chrome, black, and gold finish available. Fits Fender Bass models. Mounting hardware included.

Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing.
Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing. You no longer have to feed your strings through the retainer and chance scratching your instrument's head...

Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing.
Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing. You no longer have to feed your strings through the retainer and chance scratching your instrument's head...

Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing.
Machined from quality aircraft aluminum to ensure light weight and high strength. Unique top load slot design allows for quick and easy stringing. You no longer have to feed your strings through the retainer and chance scratching your instrument's head...

Thumb Rest for 4 String Ernie Ball MusicMan ® Stingray Basses
Zero Mod Music Man Stingray Bass Thumb Rest This thumb rest is made out of high quality dead clear polycarbonate or solid black acrylic, and precision CNC made in a machine shop here in the USA. The position and design mean NO NEW HOLES in...

Thumb rest for the Geddy Lee, Mexican, and American Jazz.
In response to requests from Ric owners for a Fender version, we came up with this. Like the Zero Mod for Ric, it requires NO new holes and uses the existing pickguard screw holes to give you a thumb rest with solid feel and great range of position!. The...

1/4" Thick Thumbrest for RickenBacker 4003
If you are a fingerstyle player with a Rickenbacker 4003, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...

3/8" Thick Thumbrest for RickenBacker 4003
If you are a fingerstyle player with a Rickenbacker 4003, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...

1/4" Thick Thumbrest for RickenBacker 4001
If you are a fingerstyle player with a Rickenbacker 4001, you know there is no really good place to"hang your thumb" - You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in", and many Rics with the chrome cover...

White or Black Felt Strap Button Cushion (2 pc)
Felt Cushions for Strap Buttons (2 pieces). 1/2" diameter, .150" thick. Available in White or Black. Two Cushions for a single bass with two strap buttons.

Nickel, Chrome, Aged Chrome, Black, or Gold Neck Plate
Neck Plate, 4 Hole, for Guitar or Bass. The plate is 2" x 2-1/2". Screw holes are spaced 1-1/2" x 2"

ElectroSocket Jackplate in Chrome, Black, and Gold
Allparts ElectroSocket jackplate with Screws Takes Switchcraft 1/4" Input Jack. Fits onto the standard 7/8"-diameter hole. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening. Chrome,...

Nickel, Black, or Gold Bass String Tree
Bass String Tree Round With Screw

Chrome, Black, or Gold Recessed Neck Screw Bushings (4 pieces)
These neck screw bushings are a perfect solution to bolt on neck constructions that don't utilize a neck plate for joining the neck to the body. Recessed Neck Screw Bushings (4 pieces) For Guitar or Bass, Chrome, Black, or Gold. 19/32"...

Schaller Strap Lock System (2), Assorted finishes; Pull to Release
Schaller Strap locks - 1 pair These new revolutionary S-Locks are silent. They feature one-piece hardened steel strap buttons, aesthetic design, perfect handling, an elegant Lock-Wheel and all former hiccups have been tackled! New and...

Jazz Bass Control Plate in Chrome, Black, or Gold
These are aftermarket replacement control plates intended for Fender Jazz basses equipped with a control plate, or your own custom Jazz Bass inspired creation. The three potentiometer holes are for 3/8"(9.52mm) diameter pot shafts such as CTS, and...

All screws are 1.5" (38.1mm) long. Some manufacturers supply pickup screws with their pickups, some do not...
All screws are #4-24, 1.5" (38.1mm) long including the head. Some manufacturers supply pickup screws with their pickups, some do not... Aguilar Pickups - No screws supplied Bartolini Pickups - No screws supplied Seymour Duncan...

The Dunlop Strap Lock System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching.
The Dunlop Strap Lock System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching. The case hardened steel skin guarantees long life. The same strap can be used with several guitars,...

Metal "football" jack plate for Guitar & Bass
Football shaped, with screws. Jack hole diameter is 3/8" (9.5mm). The mounting screw holes spacing - 1-7/16" (36.5mm). The jack plate has a slight curve to match the body's curved sides.

Long Neck Plate Screws in Chrome, Black, or Gold
Long Neck Plate Screws 4-Pack Phillips Head, #8 x 1-3/4"

Short Neck Plate Screws in Chrome, Black, or Gold
Neck Plate Screws (Short) 4-Pack Phillips Head, #8 x 1-3/8"

The Dunlop Straplok System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching.
The Dunlop Straplok System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching. The case hardened steel skin guarantees long life. The same strap can be used with several guitars,...

Nickel, Chrome, Stainless, Black, or Gold Pickguard Screws
Pickguard Screws (20 pieces) Phillips Head, #4 x 1/2" Available in Nickel, Chrome, Stainless Steel, Black, and Gold finishes.

Nickel, Aged Chrome, Chrome, Black, or Gold Strap Buttons
Strap Buttons (2) With Screws Available in Nickel, Aged Chrome, Chrome, Black, and Gold.

Dunlop Strap Buttons in Nickel, Black, or Gold
Extra Straplock Buttons (for those with many basses but few straps). Two buttons for Dunlop® strap lock system, with screws. This is only the buttons.

Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel.
Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel. Measurements: .125" x .325" x 24" Due to the size/shape of this item, free shipping...

1/8" inner diameter, 1/4" outer Diameter. 1/16" Wall
One 2" Piece typically adequate for 4 screws.

24-inch (608mm) Truss Rod
Technical Specifications: Dual Action 4mm Adjustment Wrench Included Adjuster nut has an outside diameter of 0.33"(8.3mm) Wrapped Straight bit (.25") used to route main channel Cove...

1/2" Thick X 1/2" Wide X 8" Long
One 8" Piece typically adequate for 2 Jazz Style Pickups.  Wondering how to use this? Check out this article on setting your...

3-Hole Jazz Bass Control Plate
Jazz Bass control plate with three holes for controls. Perfect for building your own 62' Jazz Bass style passive control layout.

1 Rectangular Piece
Black acrylic sheet to be used for back plate. One side is shiny black, the other side is satin black. Each piece sold separately. Each piece sold as a rectangular sheet for you to create a back plate to your own shape/styling needs Each...

A tribute to the GK800RB amplifier served on a Jazzplate with active/passive switching and a new Contour switch feature.
800JP Jazzplate (Volume-Volume) The 800JP (previously 800TS) preamp borrows the EQ section of the famous GK800RB amplifier and squeezes it into an onboard preamp, loaded into a Jazz-plate, for you Jazz bass lovers. This tone stack has...

Volume-Blend configuration, solderless, fits most Jazz Basses without modifications.
Lusithand NFP Jazz Control Plate (Volume-Volume) The NFP Jazzplate is just an easy way for Jazz bass players to have the NFP filter sound on their instruments. It is solderless and it should fit on most Jazz basses on the market without any...

Lusithand NFP Double Jazz Control Plate
Lusithand NFP Double Jazz Control Plate This is a direct replacement plate that will fit most Jazz basses. It's solderless and very easy to install, no need for opening holes for batteries as a single 9v sits perfectly in the cavity. The...

800TS Jazzplate
800TS Jazzplate A tibute to the GK800RB amplifier served on a Jazzplate with active/passive switching. Get that signature sound, straight out of your bass. Make it growl, make it deep, make it clear. It’s all there!! Acive...

A tribute to the GK800RB amplifier served on a Jazzplate with active/passive switching and a new Contour switch feature.
800JP Jazzplate (Volume-Blend) The 800JP (previously 800TS) preamp borrows the EQ section of the famous GK800RB amplifier and squeezes it into an onboard preamp, loaded into a Jazz-plate, for you Jazz bass lovers. This tone stack has...

JB plate replacement for Jazz bass with Volume, Blend, Tone, with solderless connections
Richter JB-VBT Preamp - JB plate replacement for Jazz bass The RICHTER JB PASSIVE control plate is an easy mounting component for passive bass guitars like the Jazz Bass TM. It provides a volume pot, an MN taper balance pot and one tone control...

Volume-Volume configuration, solderless, fits most Jazz Basses without modifications.
Lusithand NFP Jazz Control Plate (Volume-Volume) The NFP Jazzplate is just an easy way for Jazz bass players to have the NFP filter sound on their instruments. It is solderless and it should fit on most Jazz basses on the market without any...

NOLL 9 lug Stereo Jack High quality ¼" stereo jack with 2 switches. Used for our parametric preamps and switching on a battery in an active system when a ¼" plug is inserted. Requires ⅜"-diameter mounting...

...

Long-threaded jack for mono ?and? stereo applications Nickel
Pure Tone Mono/Stereo 1/4in. Barrel Jack 35 mm (1.38") threaded shaft length / 40 mm (1.57") overall shaft length. This new panel-mount jack boasts full contact for optimal signal and lowest possible noise. Greater surface...

Pure Tone Mono Output Jack The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a...

*Stereo version for instruments with stereo outputs or active electronics*
Pure Tone Stereo Output Jack The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies...

Long Threaded Barrel Input Jack
Long Threaded Barrel Input Jack, Stereo, Gold, Switchcraft, With Nut and Washer. Accepts 1/4" plug, and can be wired mono or stereo. 1/2"-diameter mounting hole,needed and at least 7/16" wood thickness are required for mounting. Overall length 2".

1/4 Output Jack
1/4 Output Jack, Stereo, Switchcraft #12B, with nut and washer. A stereo output jack is used for stereo wiring, or to turn on/off onboard active systems when the plug is inserted. Requires 3/8"-diameter mounting hole; 3/8 x 32 threaded portion is 3/8"...

The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...

Switchcraft #11 1/4" Mono Input Jack
1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.

Fits standard split shaft pots with 6mm diameter. Push-on knobs.
Fits standard split'shaft pots with 6mm diameter. Push-on knobs.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Beveled Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw. Dimensions of 3/4"(19.0mm) diameter x 3/4"(19.0mm) height.

Dual Concentric Knob in Chrome or Black
Lusithand Concentric Knob Dual concentric knobs to use with dual-concentric potentiometers. For 8mm ⌀ (bottom)  and 6mm ⌀ (top) shafts.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw.
Concentric Stacked Metal Beveled Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw....

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Dome Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.23/32"(18.2mm) inch tall x 3/4"(19.0mm) inch wide.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Secures with set screw.
Concentric Stacked Metal Dome Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Top knob is 7/16"(11.1mm) inch tall x 9/16"(14.3mm)...

Low-profile, soft-touch, 2 color control knob with integral nut cover
Rubberized plastic knob 63B with marker

Low-profile, hard-touch, 2 color control knob with integral nut cover
Fits standard knurled, split'shaft pot.

Bartolini Black Plastic Push On Concentric Knob Same knob that ships with all Bartolini preamps.

Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment and stability.The total height is 15.6mmThe diameter is 18.7mmThe skirt that covers the nut and washer on the underside is 4mm from the inside bottom surface for a nice clean appearance.
Large Black Aluminum KnobThe hole for the shaft has a 1/4" diameter that can be stepped down to fit a 6mm shaft with the included brass sleeve.The knob has 2 Set screws to secure the knob to the post of the potentiometer for better alignment...

2 Set screws. Fits standard split shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split shaft pots for tight fit.
Small Black Aluminum Knob 2 Set screws. Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Included are sleeves for use over split'shaft pots for tight fit. 1/4 inch diameter shaft hole. Dimensions for small knob are 0.5"(12.7mm)...

Matches other Aluminum knobs.
Concentric Stacked Black Aluminum Knob Fits pots that have a lower shaft diameter of 8mm and upper shaft diameter of 6mm. Secures with set screw. Lower knob is roughly 3/4"(19mm) wide .3/8"(9.5mm) tall, upper knob is 5/8"(15.9mm) wide, and...

EMG Concentric Single knob for EMG preamps and controls.
EMG single fluted knob. 6mm inner diameter.

EMG Concentric Upper knob for EMG preamps and controls.
EMG Fluted Black Plastic Concentric Knob found on stacked EMG Preamp Controls. Upper knob only.

EMG Concentric Black Plastic Lower Knob
EMG Concentric Black Plastic Lower knob. Inner Diamter 8mm.

Black Knob Set (Qty 3) Fits USA 1/4" (6.3mm) solid shaft pots. Can be stepped down to fit 6mm diameter solid or split shaft pots with brass pot sleeves, BBG 37.
Black Knob Set (Qty 3) With set screws for Jazz Bass, fits USA 1/4" (6.3mm) solid shaft pots.

Fender Concentric Black Plastic Jazz Bass Upper Knob fits 3/16" CTS solid upper shaft concentric pots
Fender black plastic jazz bass upper control knob. Intended for use with Fender stacked CTS 3/16" solid upper shaft potentiometers.

Fender Concentric Black Plastic Jazz Bass Lower Knob fits CTS concentric pots with a 17/64" lower shaft diameter.
Fender black plastic jazz bass lower control knob. Intended for use with Fender stacked potentiometers with a 17/64" lower shaft diameter.

Single Dome Knob in Chrome, Black, or Gold
Single Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. 6mm inner diameter, 18mm overall diameter, and 18mm height.

Concentric Dome Knob in Chrome, Black, or Gold
Concentric Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. The concentric knobs have an overall diameter of 20mm (lower),...

Concentric Dome Knob in Chrome, Black, or Gold
Concentric Dome Control Knob We offer high quality metal dome control knobs for smooth shafts. These knobs with dot marking are perfectly matched to our preamps. The concentric knobs have an overall diameter of 20mm (lower),...

Fits Glockenklang and MEC pots. Secures with set screw.
Fits Glockenklang and MEC pots. Secures with set screw.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. 1 Set screw.
Fits standard split'shaft pots and solid shaft pots with 6mm diameter. 1 Set screw.

These knobs fit on Bartolini,Aguilar,EMG,Nordstrand,Mike Pope,Delano, and other preamps that have stacked (concentric) pots that have a lower shaft of 8mm and upper shaft of 6mm. Secures with set screw.
O-ring two-piece stacked knob. Chrome, Satin, Black and Gold finish available with rubber rings for a no-slip grip. Fits control pots with 6mm top and 8mm bottom shafts. Each section attaches with a set screw.

The PT-1425-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted for a quick and simple install.
The PT-1425-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall...

The PT-1412-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted for a quick and simple install.
The PT-1412-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall...

The PT-1215-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
The PT-1215-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-1205-00 is the perfect option to upgrade the nut on your bass guitar. It is pre-slotted for a quick and simple install.
The PT-1205-00 is the perfect option to upgrade the nut on your bass guitar. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

The PT-1200-00 is Black TUSQ XL 4 string slotted bass nut. It is a great option to upgrade or replace the nut on your bass.
The PT-1200-00 is Black TUSQ XL 4 string slotted bass nut. It is a great option to upgrade or replace the nut on your bass. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16" thick slab of Black TUSQ XL.
The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16" thick slab of Black TUSQ XL. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-1654-00 (54x6) is the perfect option to upgrade the nut on your six string bass guitar. It is pre-slotted for a quick and simple install.
The PT-1654-00 is the perfect option to upgrade the nut on your six string bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall...

The PT-1401-00 is the perfect option to upgrade the nut on your five string bass guitar. It is pre-slotted for a quick and simple install.
The PT-1401-00 is the perfect option to upgrade the nut on your five string bass guitar. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-1600-00 is the perfect option to upgrade the nut on your six string bass guitar. It is pre-slotted for a quick and simple install.
The PT-1600-00 is the perfect option to upgrade the nut on your six string bass guitar. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-4025-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 1/4" thick slab of Black TUSQ XL.
The PT-4025-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 1/4" thick slab of Black TUSQ XL. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PQL-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
The PQL-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PQL-2200-00 is a great option to replace and upgrade the nut on your Fender style guitar or bass. This nut is not slotted.
The PQL-2200-00 is a great option to replace and upgrade the nut on your Fender style guitar or bass. This nut is not slotted. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

The PQL-4000-00 is a great option to replace and upgrade the nut on just about any guitar. It is not slotted so this will need to be done.
The PQL-4000-00 is a great option to replace and upgrade the nut on just about any guitar. It is not slotted so this will need to be done. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PQL-1000-00 is a great option to upgrade or replace the nut on your Fender style electric guitar or bass. It is pre-shapped but requires slots to be complete.
The PQL-1000-00 is a great option to upgrade or replace the nut on your Fender style electric guitar or bass. It is pre-shapped but requires slots to be complete. No matter what type of stringed instrument you have, the nut is one of the most...

The PQL-1204-00 is the perfect option to upgrade the nut on your Fender Precision style bass guitar. It is pre-slotted making installation quick and simple.
The PQL-1204-00 is the perfect option to upgrade the nut on your Fender Precision style bass guitar. It is pre-slotted making installation quick and simple. No matter what type of stringed instrument you have, the nut is one of the most important...

The PT-4125-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 1/8" thick slab of Black TUSQ XL.
The PT-4125-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 1/8" thick slab of Black TUSQ XL. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PQ-1254-00 is a great option to upgrade the nut on your 4 string bass guitar. It is pre-slotted to make for an easy install.
The PQ-1254-00 is a great option to upgrade the nut on your 4 string bass guitar. It is pre-slotted to make for an easy install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

The PQ-1412-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted to make for a quick and easy install.
The PQ-1412-00 is the perfect option to upgrade the nut on your five string bass. It is pre-slotted to make for a quick and easy install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PQ-1425-00 is a great option to upgrade or replace the nut on your five string bass. It is pre-slotted for a quick and easy install.
The PQ-1425-00 is a great option to upgrade or replace the nut on your five string bass. It is pre-slotted for a quick and easy install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall...

The PQ-1400-00 is a great option to upgrade the nut on your 5 string bass. It is pre-slotted to make for an easy install.
The PQ-1400-00 is a great option to upgrade the nut on your 5 string bass. It is pre-slotted to make for an easy install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance,...

The PQ-1214-00 is the perfect option to upgrade or replace the nut on your 4 string Fender Jazz style bass guitar. It is pre-slotted so it will make for an easy install.
The PQ-1214-00 is the perfect option to upgrade or replace the nut on your 4 string Fender Jazz style bass guitar. It is pre-slotted so it will make for an easy install. No matter what type of stringed instrument you have, the nut is one of...

The PT-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
The PT-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install. No matter what type of stringed instrument you have, the nut is one of the most important parts of the...

The PT-1204-00 is the perfect option to upgrade the nut on your Fender Precision style bass guitar. It is pre-slotted making installation quick and simple.
The PT-1204-00 is the perfect option to upgrade the nut on your Fender Precision style bass guitar. It is pre-slotted making installation quick and simple. No matter what type of stringed instrument you have, the nut is one of the most important...

The PQ-1200-00 is TUSQ 4 string slotted bass nut. It is a great option to upgrade or replace the nut on your bass.
The PQ-1200-00 is TUSQ 4 string slotted bass nut. It is a great option to upgrade or replace the nut on your bass. No matter what type of stringed instrument you have, the nut is one of the most important parts of the overall performance, playability...

The PQ-1204-00 is the perfect option to upgrade the nut on your4 string Fender Precision style bass guitar. It is pre-slotted so it makes for an easy install.
The PQ-1204-00 is the perfect option to upgrade the nut on your4 string Fender Precision style bass guitar. It is pre-slotted so it makes for an easy install. No matter what type of stringed instrument you have, the nut is one of the most important...

Chrome Knurled Upper Knob for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Chrome knurled knob. Set screw mount. Designed to fit concentric solid 3/16"(4.75mm) shaft potentiometer used on the American Vintage '62 Jazz Bass®. Package includes mounting set screw.

Black Knurled Lower Knob for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Black knurled knob. Set screw mount. Package includes mounting set screw. Designed to fit concentric solid 17/64"(6.75mm) shaft potentiometer used on the American Vintage '62 Jazz Bass®

#3-48 Screws, 1in. length
EMG H Screw and Spring Set #3-48 Screws, 1'' length: Two (2) screws and two (2) springs used for height adjustment on humbuckers mounted onto a pickguard or pickup ring.

Ric 4003 2015-2020 retro pickguard Thumb Rest
If you are a finger-style player with a Rickenbacker 4003, you know there is no really good place to "hang your thumb." You see many Rics with a wear spot at the corner of the pickguard, where players try to"dig in," and many Rics with the chrome...

The Zero-Mod Thumb Rest for 5 String Music Man/Ernie Ball Stingray Bass
The Zero-Mod Thumb Rest for 5 String Music Man/Ernie Ball Stingray Bass. This thumb rest allows you to achieve the range and reach of the classic Fender rest on your 5 string Stingray. Made in the USA Easy on/Easy off No...

The Zero-Mod Thumb Rest for Fender® ’51 and other 50’s years Vintage Precision Reissues, and Telecaster (Tele) basses.
Zero-Mod Vintage Precision / Telecaster Bass Thumb Rest Clear Do you want that fat meaty sound you get from the "P Bass/Jazz Bass" thumb rest fingering positions? Do you have misgivings about drilling holes in your Vintage Reissue P-Bass...

Thumb rest for Lakland Joe Osborne, 44-60, Darryl Jones Jazz Bass Models, and possibly others.
This is for the Joe Osborne, 44-60, Darryl Jones editions, but may well fit others. Please see the pic showing measurements . Basically you need 3 and 1/16 inches (screw center to screw center) and clearance from the neck pickup to fit - We believe...

The PB1​V2 - More ergonomic aggressive styling
...

...

Dunlop Hard Felt Pick
Special, high grade hard felt pick. Manufactured from a high density wool & cotton material. Beveled playing tip. Gauges: 3.2MM.

The GrooveTech kit provide everything you need to work on your bass, and an Easy Setup Guide is included that takes the mystery out of it.
Have tool kit; will travel. Bass players may know a little about truss rods and action, but few actually attempt adjustment. That's a shame, because a substantial upgrade in your performance can be realized with a properly set up axe. The GrooveTech kit...

Standard Driver provides firm contact over the entire slot width for damage-free adjustment.
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....

The first multi-tool for guitars and basses that's actually useful, without unnecessary gimmicks.
New Second Generation Design Introduced in 2008 - the original GrooveTech Multi-Tool was an instant hit with guitar and bass players alike. Never before had a multi-tool provided such functionality or made use of pro-grade components. Despite...

The Cheater Driver allows quick minor adjustment without removing the neck
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....

The patented Planet Waves Bass Pro-Winder is a high-quality peg winder with a built-in string cutter and stretcher.
The patented Planet Waves Bass Pro-Winder is a high-quality peg winder with a built-in string cutter and stretcher. Designed for both vintage and modern style bass tuners it is the ultimate all-in-one bass restringing tool. Hardened steel...