Accessories

The B245 EMG Pickup Buss is used on two pickup guitars that have a selection switch. The buss provides a convenient way to install either Active or Passive EMG Pickups without soldering.

Dunlop Super Bright™ Bass Strings are designed for bass players who want to stand out in the mix with a crisp top end without sacrificing any fundamental.
Dunlop Super Bright™ Bass Strings are designed for bass players who want to stand out in the mix with a crisp top end without sacrificing any fundamental. Carefully designed and tested by our team of bass players, Super Bright Bass Strings...

Marcus Miller Signature String Sets
Marcus Miller, with his groundbreaking style and trademark sound, has created a unique musical voice whose influence on modern bass players is unequaled. For decades, Marcus has refined and strengthened that voice not only by cultivating his...

The B289 switch is a low profile solderless 3 way toggle switch designed to fit standard Gibson style guitars. All switches use EMG’s "BNOG" connector arrangement and include 2 cables (short & long) for easy connection to EMG’s connection buss....

This North American built toggle switch is beefy and holds up to the rigors of rock & roll. Available in a black or ivory tip with the specific design being "one size fits all" solderless toggle for all Gibson models. The ease of solderless installation...

25k Balance Potentiometer for use with active pickups
25k Solid Shaft Blend/Balance Potentiometer

EMG 25k Stack Volume/Volume or Volume/Tone for EMG Active pickups. Solderless
EMG 25k Stack Volume/Volume or Volume/Tone for EMG Active pickups. Comes with concentric knob, output jack, interconnecting cables, and allen key

Comes with concentric knob, capacitor, wiring diagram, and allen key
EMG 25k Stack Volume/Volume or Volume/Tone for EMG Active pickups. Comes with concentric knob, capacitor, wiring diagram, and allen key

25k Ohm Active Balance Control
The ABC is an active EQ accessory that eliminates insertion loss and is designed to work with all our non-X series pickups that use a standard EMG tone pot. Insertion loss is a naturally occurring yet frustrating phenomenon that occurs most frequently...

solderless/modular EMG 25K SPL Control Volume Push Pull Potentiometer
25k Push-Pull pot for use with EMG pickups such as 35,40,45TW or any EMG pickup that requires use of a push pull pot on the Dual Mode pickups that require them.

EMG 25k Solderless Volume Potentiometer
25k Split-Shaft Volume Pot. Solderless short shaft.

X-Series ABCX Active Balance Control
The ABCX is an active EQ accessory that eliminates insertion loss and is designed to work with all our X series pickups that have an active tone pot. Insertion loss is a naturally occurring yet frustrating phenomenon that occurs most frequently with...

EMG Concentric Single knob for EMG preamps and controls.
EMG single fluted knob. 6mm inner diameter.

EMG Concentric Upper knob for EMG preamps and controls.
EMG Fluted Black Plastic Concentric Knob found on stacked EMG Preamp Controls. Upper knob only.

EMG Concentric Black Plastic Lower Knob
EMG Concentric Black Plastic Lower knob. Inner Diamter 8mm.

The Dunlop Straplok System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching.
The Dunlop Straplok System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching. The case hardened steel skin guarantees long life. The same strap can be used with several guitars,...

The Dunlop Strap Lock System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching.
The Dunlop Strap Lock System is the strap retainer designed with the artist in mind. 360 groove and ball design allows the unit to rotate without catching. The case hardened steel skin guarantees long life. The same strap can be used with several guitars,...

Dunlop Strap Buttons in Nickel, Black, or Gold
Extra Straplock Buttons (for those with many basses but few straps). Two buttons for Dunlop® strap lock system, with screws. This is only the buttons.

The EMG AB (Afterburner) is a boost you can use instead of your tone or volume knob (does not function as a tone or volume) and activate with our variable gain push/pull pot. When the Push-Pull pot is in the “down” position there is no boost and the...

#3-48 Screws, 1in. length
EMG H Screw and Spring Set #3-48 Screws, 1'' length: Two (2) screws and two (2) springs used for height adjustment on humbuckers mounted onto a pickguard or pickup ring.

Solderless Pickup Cable for EMG pickups
EMG Solderless Pickup Cable For replacement solderless applications or converting your existing EMG's with quick connect cable option to be solderless in conjunction with EMG preamps or controls 9" in Length Sold Individually

The M288 Bass Octave Deluxe is a dual-voice octave pedal from MXR Bass Innovations that offers organic analog tone, true bypass, and a wide variety of tone-shaping options.
The M288 Bass Octave Deluxe is a dual-voice octave pedal from MXR Bass Innovations that offers organic analog tone, true bypass, and a wide variety of tone-shaping options. Powered by a single 9-volt battery, MXR's 18-volt Constant Headroom Technology(CHT)...

M87 Bass Compressor
Take your favorite studio compressor to the stage with the MXR M87 Bass Compressor.  A complete array of controls Attack, Release, Ratio, Input, and Output makes it easy to fine-tune your sound, from subtle peak limiting to hard...

M89 Bass Overdrive
Dunlop - MXR M89 Bass Overdrive The MXR Bass Overdrive is an original design that delivers warm, tube-like overdrive. Along with standard Volume, Tone and Drive controls, this pedal features a Clean control so you can blend a pre-set EQ clean...