Accessories

Chrome On-On-On 4P3T Switch
On-On-On, 4-Pole, 4P3T, Mini Switch (12 Terminals). Chrome finish. This switch is intended for those that desire a singular 3-way switch to control coil tapping functions for both neck and bridge pickup from one switch. Only available...

Black Chrome DPDT On-On-On Switch
Black Chrome On-On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.

Black-Chrome On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.

On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome.
On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome. Approximately 13mm x 23mm x 10.8mm tall.

battery terminal clip with wire
Battery terminal clip with lead wires. Dimensions:Height from Top of Battery .029", Width of Clip = .048", Length = 1" Approx.

1 Inch x 5 feet
Copper Shielding Tape: 1 Inch x 5 feet Simple Guide on How To Install Copper Shielding

3" Piece 1/16" Diameter
Heat Shrink 3" Piece 1/16" Diameter. Good for wire to wire connection

3" Piece. 1/8" Diameter
Heat Shrink 3" Piece. 1/8" Diameter.Good for wire to jack lug connection

1 foot
1 foot

1 foot
1 foot

9-Volt Battery Holder
One 9-Volt Battery Holder metal clip

Vintage Cloth Push-Back Wire Set
Vintage Style Gavitt Cloth Covered Wire Set 2' Black & 2' White. 22 gauge tinned, Single Conductor, seven strand, Vintage Style, push back, cloth covered wire. Stranded wire with a waxed braided cotton outer insulation.

Black Potentiometer and Jack Nut (25 pieces)
Extra Nuts for Pots and Input Jacks (25 pieces), Black 3/8" x 32 thread Check the existing dimensions of your potentiometer, or input jack for compatibility on sizing.

Black Potentiometer and Jack Washer (25 pieces)
Extra Dress Washers (25 pieces) for Pots and Input Jacks, Black

1 Rectangular Piece
Black acrylic sheet to be used for back plate. One side is shiny black, the other side is satin black. Each piece sold separately. Each piece sold as a rectangular sheet for you to create a back plate to your own shape/styling needs Each...

Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel.
Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel. Measurements: .125" x .325" x 24" Due to the size/shape of this item, free shipping...

1/2" Thick X 1/2" Wide X 8" Long
One 8" Piece typically adequate for 2 Jazz Style Pickups.  Wondering how to use this? Check out this article on setting your...

1/8" inner diameter, 1/4" outer Diameter. 1/16" Wall
One 2" Piece typically adequate for 4 screws.

Nickel, Black, or Gold Bass String Tree
Bass String Tree Round With Screw

Nickel, Aged Chrome, Chrome, Black, or Gold Strap Buttons
Strap Buttons (2) With Screws Available in Nickel, Aged Chrome, Chrome, Black, and Gold.

White or Black Felt Strap Button Cushion (2 pc)
Felt Cushions for Strap Buttons (2 pieces). 1/2" diameter, .150" thick. Available in White or Black. Two Cushions for a single bass with two strap buttons.

Nickel, Chrome, Stainless, Black, or Gold Pickguard Screws
Pickguard Screws (20 pieces) Phillips Head, #4 x 1/2" Available in Nickel, Chrome, Stainless Steel, Black, and Gold finishes.

Chrome, Black, or Gold Recessed Neck Screw Bushings (4 pieces)
These neck screw bushings are a perfect solution to bolt on neck constructions that don't utilize a neck plate for joining the neck to the body. Recessed Neck Screw Bushings (4 pieces) For Guitar or Bass, Chrome, Black, or Gold. 19/32"...

Nickel, Chrome, Aged Chrome, Black, or Gold Neck Plate
Neck Plate, 4 Hole, for Guitar or Bass. The plate is 2" x 2-1/2". Screw holes are spaced 1-1/2" x 2"

Long Neck Plate Screws in Chrome, Black, or Gold
Long Neck Plate Screws 4-Pack Phillips Head, #8 x 1-3/4"

Short Neck Plate Screws in Chrome, Black, or Gold
Neck Plate Screws (Short) 4-Pack Phillips Head, #8 x 1-3/8"

Pickup mounting screws (8 pcs.) in Black, Chrome or Gold - 1¼" long. Some manufacturers supply pickup screws with their pickups, some do not...
Pickup mounting screws (8 pcs.) for bass, 1-1/4" long. Available in Black, Chrome, or Gold finish. Some manufacturers supply pickup screws with their pickups, some do not...

Black Knob Set (Qty 3) Fits USA 1/4" (6.3mm) solid shaft pots. Can be stepped down to fit 6mm diameter solid or split shaft pots with brass pot sleeves, BBG 37.
Black Knob Set (Qty 3) With set screws for Jazz Bass, fits USA 1/4" (6.3mm) solid shaft pots.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Secures with set screw.
Concentric Stacked Metal Dome Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Top knob is 7/16"(11.1mm) inch tall x 9/16"(14.3mm)...