The Type 4A Mustang Pickup is an exact replacement designed with better frequency response than the original. This pickup is built using the re-issue bobbin size. Mustang pickups are series hum bucking (SHB), the same as a PB pickup. Pickup covers are not available from Aero, but the Mustang pickup will fit perfectly into your original covers.
This pickup utilizes Alnico V 1/4" pole pieces.
This pickup is intended for 16.00mm spacing measured over the pickup.
Aero does not provide screws with their pickups. If you need pickup screws, you can get them on the Pickup Screws page.