The Best Bass Gear website will be down for scheduled maintainence on 5/17/24 starting at 2AM EDT.

Electronics

Frankie - Bass Tech Will these Electronics work with your Bass? Ask Frankie, our Bass Tech.

We carry a wide array of electronics and electronic components to provide either replacement for your failing electronics or allow you to finish the custom dream build that you are planning or working on. Everything from passive wiring harnesses, potentiometers, switches, jacks, shielding tape for your control cavity, capacitors, jack plates, battery clips, battery holders, and even wire and heat shrink tubing are available. If you require something that you do not see listed please feel free to contact us.

Frequently Asked Questions

Question: Where Can I Buy Electronics?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter
  1. 4P3T On-On-On Chrome Mini Switch

    $38.50
    Chrome On-On-On 4P3T Switch
    On-On-On, 4-Pole, 4P3T, Mini Switch (12 Terminals). Chrome finish. This switch is intended for those that desire a singular 3-way switch to control coil tapping functions for both neck and bridge pickup from one switch. Only available...
  2. 3-Way On-On-On Black Chrome Round Bat Mini Switch

    $10.65
    Black Chrome DPDT On-On-On Switch
    Black Chrome On-On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.
  3. Black Chrome On On Round Bat Mini Switch

    $5.44
    Black-Chrome On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.
  4. 4-Pole On On 4PDT Chrome Mini Switch

    $14.86
    On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome.
    On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome. Approximately 13mm x 23mm x 10.8mm tall.
  5. Battery Terminals 9v - 9 Volt with wire

    $3.30
    battery terminal clip with wire
    Battery terminal clip with lead wires. Dimensions:Height from Top of Battery .029", Width of Clip = .048", Length = 1" Approx.
  6. Copper Shielding Tape

    $7.52
    1 Inch x 5 feet
    Copper Shielding Tape: 1 Inch x 5 feet Simple Guide on How To Install Copper Shielding
  7. Heat Shrink - 1/16 inch Diameter

    $0.52
    3" Piece 1/16" Diameter
    Heat Shrink 3" Piece 1/16" Diameter. Good for wire to wire connection
  8. Heat Shrink - 1/8 inch Diameter

    $0.37
    3" Piece. 1/8" Diameter
    Heat Shrink 3" Piece. 1/8" Diameter.Good for wire to jack lug connection
  9. Wire - Black Wire

    $1.00
    1 foot
    1 foot
  10. Wire - White Wire

    $1.00
    1 foot
    1 foot
  11. 9v Battery Holder METAL clip

    $2.86
    9-Volt Battery Holder
    One 9-Volt Battery Holder metal clip
  12. Cloth Wire Kit

    $6.25
    Vintage Cloth Push-Back Wire Set
    Vintage Style Gavitt Cloth Covered Wire Set 2' Black & 2' White. 22 gauge tinned, Single Conductor, seven strand, Vintage Style, push back, cloth covered wire. Stranded wire with a waxed braided cotton outer insulation.
  13. Black Nuts 25 piece pak

    $15.35
    Black Potentiometer and Jack Nut (25 pieces)
    Extra Nuts for Pots and Input Jacks (25 pieces), Black 3/8" x 32 thread Check the existing dimensions of your potentiometer, or input jack for compatibility on sizing.
  14. Black Dress Washers for Input Jacks

    $5.78
    Black Potentiometer and Jack Washer (25 pieces)
    Extra Dress Washers (25 pieces) for Pots and Input Jacks, Black
  15. Bourns 500k linear taper mini 6mm (.236 in.) solid shaft potentiometer

    $5.95
    Bourns Mini Linear Taper Guitar pots.
    Bourns 500k linear taper mini 6mm (.236 in.) solid shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Solid Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation 1/4"...
  16. Bourns 250k linear taper mini 6mm (.236 in.) solid shaft potentiometer

    $5.95
    Bourns Mini Linear Taper Guitar pots.
    Bourns 250k linear taper mini 6mm (.236 in.) solid shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Solid Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation 1/4"...
  17. Bourns 500k linear taper mini 6mm (.236 in.) split shaft potentiometer

    $8.20
    Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 500k linear taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...
  18. Bourns 250k linear taper mini 6mm (.236 in.) split shaft potentiometer

    $8.00
    Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 250k linear taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...
  19. Bourns 500k audio taper mini 6mm (.236 in.) solid shaft potentiometer

    $7.60
    Mini Carbon Element, Solid Shaft.
    Bourns 500k audio taper mini 6mm (.236 in.) solid shaft potentiometer Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element 1/4"...
  20. Bourns 250k audio taper mini 6mm (.236 in.) solid shaft potentiometer

    $7.60
    Mini Carbon Element, Solid Shaft.
    Bourns 250k audio taper mini 6mm (.236 in.) solid shaft potentiometer Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element 1/4"...
  21. Bourns 1M audio taper push/pull 6mm (.236 in.) split shaft potentiometer

    $15.00
    Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
    Bourns 1M audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull Switch...
  22. Bourns 500k audio taper push/pull 6mm (.236 in.) split shaft potentiometer

    $15.00
    Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
    Bourns 500k audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull...
  23. Bourns 250k audio taper push/pull 6mm (.236 in.) split shaft potentiometer

    $15.00
    Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
    Bourns 250k audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull...
  24. Bourns 500k audio taper mini 6mm (.236 in.) split shaft potentiometer

    $8.00
    Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 500k audio taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...
  25. Bourns 250k audio taper mini 6mm (.236 in.) split shaft potentiometer

    $8.00
    Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 250k audio taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...
  26. Bourns 500k MN taper blend 6mm (.236 in.) solid shaft potentiometer

    $8.00
    Dual MN taper blend-balance with center detent.
    Bourns 500k MN taper blend 6mm (.236 in.) solid shaft potentiometer Dual MN taper blend-balance with center detent. Solid shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...
  27. Bourns 500k MN taper blend 6mm (.236 in.) split shaft potentiometer

    $8.00
    Dual MN taper blend-balance with center detent.
    Bourns 500k MN taper blend 6mm (.236 in.) split shaft potentiometer Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...
  28. Bourns 250k MN taper blend 6mm (.236 in.) split shaft potentiometer

    $8.00
    Dual MN taper blend-balance with center detent.
    Bourns 250k MN taper blend 6mm (.236 in.) split shaft potentiometer Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...
  29. Switchcraft Mono Jack

    $6.04
    Switchcraft #11 1/4" Mono Input Jack
    1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.
  30. 3-Way Switch - Black On On On Mini Switch flat

    $17.46
    On-On-On Mini Switch, DP3T, With Mounting Hardware, Black
    On-On-On Mini Switch, DP3T, With Mounting Hardware, Black

Frequently Asked Questions

Question: Where Can I Buy Electronics?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter