Accessories

1/8" inner diameter, 1/4" outer Diameter. 1/16" Wall
One 2" Piece typically adequate for 4 screws.

3" Piece. 1/8" Diameter
Heat Shrink 3" Piece. 1/8" Diameter.Good for wire to jack lug connection

3" Piece 1/16" Diameter
Heat Shrink 3" Piece 1/16" Diameter. Good for wire to wire connection

1 foot
1 foot

1 foot
1 foot

White or Black Felt Strap Button Cushion (2 pc)
Felt Cushions for Strap Buttons (2 pieces). 1/2" diameter, .150" thick. Available in White or Black. Two Cushions for a single bass with two strap buttons.

1/2" Thick X 1/2" Wide X 8" Long
One 8" Piece typically adequate for 2 Jazz Style Pickups.  Wondering how to use this? Check out this article on setting your...

Allows you to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.
Pair of Brass Pot Sleeves (Quantity of two) Used to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.

Long Neck Plate Screws in Chrome, Black, or Gold
Long Neck Plate Screws 4-Pack Phillips Head, #8 x 1-3/4"

9-Volt Battery Holder
One 9-Volt Battery Holder metal clip

battery terminal clip with wire
Battery terminal clip with lead wires. Dimensions:Height from Top of Battery .029", Width of Clip = .048", Length = 1" Approx.

Nickel, Black, or Gold Bass String Tree
Bass String Tree Round With Screw

Pickup mounting screws (8 pcs.) in Black, Chrome or Gold - 1¼" long. Some manufacturers supply pickup screws with their pickups, some do not...
Pickup mounting screws (8 pcs.) for bass, 1-1/4" long. Available in Black, Chrome, or Gold finish. Some manufacturers supply pickup screws with their pickups, some do not...

Nickel, Aged Chrome, Chrome, Black, or Gold Strap Buttons
Strap Buttons (2) With Screws Available in Nickel, Aged Chrome, Chrome, Black, and Gold.

500K Volume Pot
500K Mini Pot, Audio Taper, 3/8" Long Bushing, Split, Knurled Shaft with Nut and Washer

Black-Chrome On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.

Chrome, Black, or Gold Recessed Neck Screw Bushings (4 pieces)
These neck screw bushings are a perfect solution to bolt on neck constructions that don't utilize a neck plate for joining the neck to the body. Recessed Neck Screw Bushings (4 pieces) For Guitar or Bass, Chrome, Black, or Gold. 19/32"...

Black Potentiometer and Jack Washer (25 pieces)
Extra Dress Washers (25 pieces) for Pots and Input Jacks, Black

Switchcraft #11 1/4" Mono Input Jack
1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.

Vintage Cloth Push-Back Wire Set
Vintage Style Gavitt Cloth Covered Wire Set 2' Black & 2' White. 22 gauge tinned, Single Conductor, seven strand, Vintage Style, push back, cloth covered wire. Stranded wire with a waxed braided cotton outer insulation.

Short Neck Plate Screws in Chrome, Black, or Gold
Neck Plate Screws (Short) 4-Pack Phillips Head, #8 x 1-3/8"

1 Inch x 5 feet
Copper Shielding Tape: 1 Inch x 5 feet Simple Guide on How To Install Copper Shielding

1 Rectangular Piece
Black acrylic sheet to be used for back plate. One side is shiny black, the other side is satin black. Each piece sold separately. Each piece sold as a rectangular sheet for you to create a back plate to your own shape/styling needs Each...

Metal "football" jack plate for Guitar & Bass
Football shaped, with screws. Jack hole diameter is 3/8" (9.5mm). The mounting screw holes spacing - 1-7/16" (36.5mm). The jack plate has a slight curve to match the body's curved sides.

ElectroSocket Jackplate in Chrome, Black, and Gold
Allparts ElectroSocket jackplate with Screws Takes Switchcraft 1/4" Input Jack. Fits onto the standard 7/8"-diameter hole. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening. Chrome,...

Black Knob Set (Qty 3) Fits USA 1/4" (6.3mm) solid shaft pots. Can be stepped down to fit 6mm diameter solid or split shaft pots with brass pot sleeves, BBG 37.
Black Knob Set (Qty 3) With set screws for Jazz Bass, fits USA 1/4" (6.3mm) solid shaft pots.

Fits standard split shaft pots with 6mm diameter. Push-on knobs.
Fits standard split'shaft pots with 6mm diameter. Push-on knobs.

On-Off-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/Off/On Specifications Type: mini toggle switch Electrical function: on/off/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...

Black Chrome DPDT On-On-On Switch
Black Chrome On-On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Beveled Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw. Dimensions of 3/4"(19.0mm) diameter x 3/4"(19.0mm) height.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Dome Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.23/32"(18.2mm) inch tall x 3/4"(19.0mm) inch wide.

Nickel, Chrome, Aged Chrome, Black, or Gold Neck Plate
Neck Plate, 4 Hole, for Guitar or Bass. The plate is 2" x 2-1/2". Screw holes are spaced 1-1/2" x 2"

Nickel, Chrome, Stainless, Black, or Gold Pickguard Screws
Pickguard Screws (20 pieces) Phillips Head, #4 x 1/2" Available in Nickel, Chrome, Stainless Steel, Black, and Gold finishes.

500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer.
500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer. Split-Shaft

On-On-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/On/On Specifications Type: mini toggle switch Electrical function: on/on/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...

On-On 3-Pole Mini Switch, Chrome
...

On-On Mini Switch, DPDT, With Mounting Hardware
On-On Mini Switch, DPDT, With Mounting Hardware

These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw.
Concentric Stacked Metal Beveled Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw....

These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Secures with set screw.
Concentric Stacked Metal Dome Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Top knob is 7/16"(11.1mm) inch tall x 9/16"(14.3mm)...

On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome.
On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome. Approximately 13mm x 23mm x 10.8mm tall.

Black Potentiometer and Jack Nut (25 pieces)
Extra Nuts for Pots and Input Jacks (25 pieces), Black 3/8" x 32 thread Check the existing dimensions of your potentiometer, or input jack for compatibility on sizing.

Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer
Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer. Metric. Outer (lower) shaft 8mm diameter, inner (upper) shaft 6mm diameter. Outer (lower) shaft 10mm height, inner (upper) shaft 10mm height. Threaded...

Dual 25k Blend/Balance MN Taper Pot.Use with active pickups
Dual 25k Blend/Balance MN (linear) Taper Pot, with Center Detent and hardware. Use with active pickups, EMG...some others Technical Specifications: Threaded Bushing Diameter: ~.272" Threaded...

Alpha 25k Volume Push/Pull Potentiometer
Alpha 25k Audio Taper Volume Push/Pull Potentiometer with 6mm Split Shaft For use with active pickups like EMG

On-Off-On Mini Switch, DPDT, With Mounting Hardware
On-Off-On Mini Switch, DPDT, With Mounting Hardware Specifications 5/16" thread bushing height 1/4" diameter hole 5/8" body cavity depth needed Knob portion is 12mm long

On-On-On Mini Switch, DP3T, With Mounting Hardware
On-On-On Mini Switch, DP3T, With Mounting Hardware

Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel.
Single Individual Carbon fiber rod for neck reinforcement. .125" thickness allows standard table saw blade to be used for cutting channel. Measurements: .125" x .325" x 24" Due to the size/shape of this item, free shipping...

Jazz Bass Control Plate in Chrome, Black, or Gold
These are aftermarket replacement control plates intended for Fender Jazz basses equipped with a control plate, or your own custom Jazz Bass inspired creation. The three potentiometer holes are for 3/8"(9.52mm) diameter pot shafts such as CTS, and...

DR 4, 5, and 6 Long Neck Tapered Stainless Steel Roundwound Bass Strings
LONG NECKS™ Taper Core Stainless Steel Bass Strings wound on a Hex CoresContemporary bass players, as well as bass makers, who demand a taper core string to enable modern bass playing techniques, will be delighted by the superior performance...