Accessories

On-Off-On Mini Switch, DPDT, With Mounting Hardware
On-Off-On Mini Switch, DPDT, With Mounting Hardware Specifications 5/16" thread bushing height 1/4" diameter hole 5/8" body cavity depth needed Knob portion is 12mm long

Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer
Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer. Metric. Outer (lower) shaft 8mm diameter, inner (upper) shaft 6mm diameter. Outer (lower) shaft 10mm height, inner (upper) shaft 10mm height. Threaded...

On-On-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/On/On Specifications Type: mini toggle switch Electrical function: on/on/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...

On-On 3-Pole Mini Switch, Chrome
...

On-Off-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/Off/On Specifications Type: mini toggle switch Electrical function: on/off/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...

Alpha 25k Volume Push/Pull Potentiometer
Alpha 25k Audio Taper Volume Push/Pull Potentiometer with 6mm Split Shaft For use with active pickups like EMG

Dual 25k Blend/Balance MN Taper Pot.Use with active pickups
Dual 25k Blend/Balance MN (linear) Taper Pot, with Center Detent and hardware. Use with active pickups, EMG...some others Technical Specifications: Threaded Bushing Diameter: ~.272" Threaded...

500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer.
500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer. Split-Shaft

500K Volume Pot
500K Mini Pot, Audio Taper, 3/8" Long Bushing, Split, Knurled Shaft with Nut and Washer

On-On Mini Switch, DPDT, With Mounting Hardware
On-On Mini Switch, DPDT, With Mounting Hardware

On-On-On Mini Switch, DP3T, With Mounting Hardware
On-On-On Mini Switch, DP3T, With Mounting Hardware

Metal "football" jack plate for Guitar & Bass
Football shaped, with screws. Jack hole diameter is 3/8" (9.5mm). The mounting screw holes spacing - 1-7/16" (36.5mm). The jack plate has a slight curve to match the body's curved sides.

Jazz Bass Control Plate in Chrome, Black, or Gold
These are aftermarket replacement control plates intended for Fender Jazz basses equipped with a control plate, or your own custom Jazz Bass inspired creation. The three potentiometer holes are for 3/8"(9.52mm) diameter pot shafts such as CTS, and...

ElectroSocket Jackplate in Chrome, Black, and Gold
Allparts ElectroSocket jackplate with Screws Takes Switchcraft 1/4" Input Jack. Fits onto the standard 7/8"-diameter hole. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening. Chrome,...

Allows you to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.
Pair of Brass Pot Sleeves (Quantity of two) Used to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.

Switchcraft #11 1/4" Mono Input Jack
1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.

Fits standard split shaft pots with 6mm diameter. Push-on knobs.
Fits standard split'shaft pots with 6mm diameter. Push-on knobs.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Beveled Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw. Dimensions of 3/4"(19.0mm) diameter x 3/4"(19.0mm) height.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw.
Concentric Stacked Metal Beveled Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw....

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Dome Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.23/32"(18.2mm) inch tall x 3/4"(19.0mm) inch wide.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Secures with set screw.
Concentric Stacked Metal Dome Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Top knob is 7/16"(11.1mm) inch tall x 9/16"(14.3mm)...

Black Knob Set (Qty 3) Fits USA 1/4" (6.3mm) solid shaft pots. Can be stepped down to fit 6mm diameter solid or split shaft pots with brass pot sleeves, BBG 37.
Black Knob Set (Qty 3) With set screws for Jazz Bass, fits USA 1/4" (6.3mm) solid shaft pots.

Pickup mounting screws (8 pcs.) in Black, Chrome or Gold - 1¼" long. Some manufacturers supply pickup screws with their pickups, some do not...
Pickup mounting screws (8 pcs.) for bass, 1-1/4" long. Available in Black, Chrome, or Gold finish. Some manufacturers supply pickup screws with their pickups, some do not...

Chrome, Black, or Gold Recessed Neck Screw Bushings (4 pieces)
These neck screw bushings are a perfect solution to bolt on neck constructions that don't utilize a neck plate for joining the neck to the body. Recessed Neck Screw Bushings (4 pieces) For Guitar or Bass, Chrome, Black, or Gold. 19/32"...

Nickel, Chrome, Aged Chrome, Black, or Gold Neck Plate
Neck Plate, 4 Hole, for Guitar or Bass. The plate is 2" x 2-1/2". Screw holes are spaced 1-1/2" x 2"

Long Neck Plate Screws in Chrome, Black, or Gold
Long Neck Plate Screws 4-Pack Phillips Head, #8 x 1-3/4"

Short Neck Plate Screws in Chrome, Black, or Gold
Neck Plate Screws (Short) 4-Pack Phillips Head, #8 x 1-3/8"

Nickel, Black, or Gold Bass String Tree
Bass String Tree Round With Screw

Nickel, Aged Chrome, Chrome, Black, or Gold Strap Buttons
Strap Buttons (2) With Screws Available in Nickel, Aged Chrome, Chrome, Black, and Gold.