Bartolini 'Classic Bass' Bass Humbucker Vintage Gibson Pickups

Bartolini 'Classic Bass' Bass Humbucker Vintage Gibson Pickups

Original Bart upgrade pickups provide bottomless lows and low-mids, their dual coil construction eliminates the noise and muddiness that vast amounts of low-end can create. The Originals are full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. You'll never find lower tones produced with higher clarity!

Made for pro-level bass players, they are fully sealed and shielded making them sweat-proof, quiet if you touch them, and immune invisible noise from stage lights and studio power supplies. The cables are shielded too.

Available in balanced versions for neck (Bass, -B) and bridge (Treble, -T).

Specifications

• Coil Structure: Dual Parallel Humbucking
• Cable Type: 4-Conductor Cable with shield and bare drain
• Magnetic Circuit: Carbon steel, brass, and copper powered by ceramic (ferrite) magnets projected shallow for wide aperture. Neck coil South and Bridge coil North for both positions

1CB-B - Neck

• DC Resistance: ~3.2KΩ each coil
• Resonant Frequency: ~4.4KHz
• Sensing Width: 2.01" [51mm] Max

1CB-T - Bridge

• DC Resistance: ~4.4KΩ each coil
• Resonant Frequency: ~3.7KHz
• Sensing Width: 2.01" [51mm] Max

Humbucker

• 2.76" [70.1mm] Long, 1.53" [38.9mm] Wide, 0.67-0.77" [17-19.6mm] Thick + 0.15" [3.8mm] Cable
• Brass bracket with 4-40 tapped holes

Please Note: Bartolini does not supply screws with their pickups. If you require pickup screws, we carry them on our pickup screws page.

Click Here for Pickup Screws.