Electronics

Frankie - Bass Tech Will these Electronics work with your Bass? Ask Frankie, our Bass Tech.

We carry a wide array of electronics and electronic components to provide either replacement for your failing electronics or allow you to finish the custom dream build that you are planning or working on. Everything from passive wiring harnesses, potentiometers, switches, jacks, shielding tape for your control cavity, capacitors, jack plates, battery clips, battery holders, and even wire and heat shrink tubing are available. If you require something that you do not see listed please feel free to contact us.

Frequently Asked Questions

Question: Where Can I Buy Electronics?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter
  1. 4-Pole On On 4PDT Chrome Mini Switch

    $14.86
    On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome.
    On-On Mini Switch, 4-Pole, 4PDT (12 terminals) With Hardware, Chrome. Approximately 13mm x 23mm x 10.8mm tall.
  2. Black Chrome On On Round Bat Mini Switch

    $5.44
    Black-Chrome On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.
  3. 3-Way On-On-On Black Chrome Round Bat Mini Switch

    $10.65
    Black Chrome DPDT On-On-On Switch
    Black Chrome On-On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting hardware. 5/16" thread bushing height; 1/4" diameter hole; 5/8" body cavity depth needed.
  4. 4P3T On-On-On Chrome Mini Switch

    $38.50
    Chrome On-On-On 4P3T Switch
    On-On-On, 4-Pole, 4P3T, Mini Switch (12 Terminals). Chrome finish. This switch is intended for those that desire a singular 3-way switch to control coil tapping functions for both neck and bridge pickup from one switch. Only available...
  5. Aguilar 2-Way On-On Black Round Bat Mini Switch
    Out of stock

    Aguilar 2-Way On-On Black Round Bat Mini Switch

    Out of stock

    $15.99
    Black DPDT On-On Switch
    We are not authorized to ship Aguilar products outside of the United States and Canada. Black On-On Mini Switch with round bat. Double pole double throw (DPDT). Includes mounting...
  6. NOLL Toggle Switch - 2-Pole On/On/On

    $17.00 - $22.00
    NOLL Toggle Switch - 2-Pole On/On/On Flat toggle switches for series/parallel pickup switching, humbucker coil-tapping, phase switching and other special wirings. 1/4"-diameter mounting hole and 5/8" body cavity depth are required. Model:...
  7. Heat Shrink - 1/8 inch Diameter

    $0.37
    3" Piece. 1/8" Diameter
    Heat Shrink 3" Piece. 1/8" Diameter.Good for wire to jack lug connection
  8. Heat Shrink - 1/16 inch Diameter

    $0.52
    3" Piece 1/16" Diameter
    Heat Shrink 3" Piece 1/16" Diameter. Good for wire to wire connection
  9. Copper Shielding Tape

    $7.52
    1 Inch x 5 feet
    Copper Shielding Tape: 1 Inch x 5 feet Simple Guide on How To Install Copper Shielding
  10. Battery Terminals 9v - 9 Volt with wire

    $3.30
    battery terminal clip with wire
    Battery terminal clip with lead wires. Dimensions:Height from Top of Battery .029", Width of Clip = .048", Length = 1" Approx.
  11. Cloth Wire Kit

    $6.25
    Vintage Cloth Push-Back Wire Set
    Vintage Style Gavitt Cloth Covered Wire Set 2' Black & 2' White. 22 gauge tinned, Single Conductor, seven strand, Vintage Style, push back, cloth covered wire. Stranded wire with a waxed braided cotton outer insulation.
  12. Wire - Black Wire

    $1.00
    1 foot
    1 foot
  13. Wire - White Wire

    $1.00
    1 foot
    1 foot
  14. EMG Solderless Pickup Cable

    $9.00
    Solderless Pickup Cable for EMG pickups
    EMG Solderless Pickup Cable For replacement solderless applications or converting your existing EMG's with quick connect cable option to be solderless in conjunction with EMG preamps or controls 9" in Length Sold Individually
  15. 9v Battery Holder METAL clip

    $2.86
    9-Volt Battery Holder
    One 9-Volt Battery Holder metal clip
  16. Black Nuts 25 piece pak

    $15.35
    Black Potentiometer and Jack Nut (25 pieces)
    Extra Nuts for Pots and Input Jacks (25 pieces), Black 3/8" x 32 thread Check the existing dimensions of your potentiometer, or input jack for compatibility on sizing.
  17. Black Dress Washers for Input Jacks

    $5.78
    Black Potentiometer and Jack Washer (25 pieces)
    Extra Dress Washers (25 pieces) for Pots and Input Jacks, Black
  18. John East BLI-01
    Out of stock

    John East BLI-01

    Out of stock

    $40.00
    9v or 18v East Battery monitor
    The East BLI-)1 is designed to indicate when the life of your 9v or 18v battery system is getting towards the end of its life. At the point the warning LED begins to flash, around once per second, there is still some useful life left in the battery....
  19. Stellartone - ToneStyler Bass Six
    Out of stock

    Stellartone - ToneStyler Bass Six

    Out of stock

    $79.00
    ToneStyler BASS SIX The B-6's audio performance and mechanical qualities remain identical to all previous ToneStyler models. This model also marks a return to "true bypass" in clockwise switch position #6.
    Stellartone ToneStyler Bass Six The ToneStyler® is an advanced drop-in replacement for the standard tone pots in electric basses. Easily installed in minutes without any modifications to the instrument, the ToneStyler dramatically improves...
  20. NOLL No. P 1021 MONO SINGLE SHAFT - PUSH/PULL 500KA Potentiometer

    $25.00
    Mono Single Shaft - Push/Pull - 500KA
    NOLL No. P 1021 MONO SINGLE SHAFT - PUSH/PULL 500KA Potentiometer This potentiometer design is for various applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive...
  21. NOLL No. P 1020 MONO SINGLE SHAFT - PUSH/PULL 500KB Potentiometer

    $25.00
    Mono Single Shaft - Push/Pull - 500KB
    NOLL No. P 1020 MONO SINGLE SHAFT - PUSH/PULL 500KB Potentiometer This potentiometer design is for various applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive...
  22. NOLL No. P 1022 MONO SINGLE SHAFT - PUSH/PULL 250KA Potentiometer

    $25.00
    Mono Single Shaft - Push/Pull - 250KA
    NOLL No. P 1022 MONO SINGLE SHAFT - PUSH/PULL 250KA Potentiometer This potentiometer design is for various applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive...
  23. NOLL No. P 1030 Passive Tone Control - 250KA/50KB Potentiometer

    $19.00
    Mono Single Shaft - Tone Control - 250KA/50KB
    NOLL No. P 1030 Passive Tone Control - 250KA/50KB Potentiometer This special double function potentiometer design is for combine passive tone control with active treble control in a single shaft unit. In active mode the 50KB section with...
  24. Bourns 500k linear taper mini 6mm (.236 in.) solid shaft potentiometer

    $5.95
    Bourns Mini Linear Taper Guitar pots.
    Bourns 500k linear taper mini 6mm (.236 in.) solid shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Solid Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation 1/4"...
  25. EMG AB Afterburner Variable gain push/pull pot

    $79.00
    The EMG AB (Afterburner) is a boost you can use instead of your tone or volume knob (does not function as a tone or volume) and activate with our variable gain push/pull pot. When the Push-Pull pot is in the “down” position there is no boost and the...
  26. 100K audio taper pot, no detent

    $9.00
    We are not authorized to ship Seymour Duncan products outside of the United States and Canada. A100K Audio Taper potentiometer for use as a volume or tone control with active Seymour Duncan...
  27. Seymour Duncan 100k linear taper EQ potentiometer with center detent

    $9.00
    We are not authorized to ship Seymour Duncan products outside of the United States and Canada. 100k Linear taper potentiometer with center detent. Used in the EQ section of Seymour Duncan...
  28. Seymour Duncan 100k concentric linear taper EQ potentiometer with center detent

    $18.00
    We are not authorized to ship Seymour Duncan products outside of the United States and Canada. 100k Linear taper concentric potentiometer with center detent. Used in the EQ section of Seymour...
  29. Bourns 250k linear taper mini 6mm (.236 in.) solid shaft potentiometer

    $5.95
    Bourns Mini Linear Taper Guitar pots.
    Bourns 250k linear taper mini 6mm (.236 in.) solid shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Solid Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation 1/4"...
  30. Bourns 250k linear taper mini 6mm (.236 in.) split shaft potentiometer

    $8.00
    Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 250k linear taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...

Frequently Asked Questions

Question: Where Can I Buy Electronics?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter