Accessories

250k Audio Potentiometer
Specifications Resistance 250kΩ Body Depth 0.45 in. Body Diameter 0.95 in. Bushing Length 0.25 in. Power Rating 0.33 W Shaft Diameter 0.25 in Shaft Length 0.38 in. Shaft...

500k Audio Potentiometer
Specifications Resistance 500kΩ Body Depth 0.45 in. Body Diameter 0.95 in. Bushing Length 0.25 in. Power Rating 0.33 W Shaft Diameter 0.25 in Shaft Length 0.38 in. Shaft...

250k Audio Pot with hardware
250K Audio Pot, CTS, solid shaft with nut, lock and dress washer. Threaded bushing is 3/8" tall.

500K Audio Pot, CTS
500k Audio Taper Pot. 24 Spline Split-Knurled Shaft with Nut, Lock, and Dress Washer. Threaded bushing is 3/8" tall This pot can be used for: Volume Control Tone Control

The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear.
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - 1/2", 7/16", and 12mm - in a compact...

The GrooveTech kit provide everything you need to work on your bass, and an Easy Setup Guide is included that takes the mystery out of it.
Have tool kit; will travel. Bass players may know a little about truss rods and action, but few actually attempt adjustment. That's a shame, because a substantial upgrade in your performance can be realized with a properly set up axe. The GrooveTech kit...

Standard Driver provides firm contact over the entire slot width for damage-free adjustment.
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....

The Cheater Driver allows quick minor adjustment without removing the neck
Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. We developed two screwdrivers specifically for this application....

The first multi-tool for guitars and basses that's actually useful, without unnecessary gimmicks.
New Second Generation Design Introduced in 2008 - the original GrooveTech Multi-Tool was an instant hit with guitar and bass players alike. Never before had a multi-tool provided such functionality or made use of pro-grade components. Despite...

CTS Audio 250k knurled split shaft DPDT potentiometer Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel,...

CTS Audio 500k knurled split shaft DPDT potentiometer Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel,...

CruzTools Bass Stagehand Compact Kit
Our GrooveTech Tech Kits are the ultimate tool kits for any guitar and bass player, but musicians who want something more portable may now consider the new StageHand kit. It provides comparable capability, yet in a compact package and budget priced. Central...