Accessories

On-Off-On Mini Switch, DPDT, With Mounting Hardware
On-Off-On Mini Switch, DPDT, With Mounting Hardware Specifications 5/16" thread bushing height 1/4" diameter hole 5/8" body cavity depth needed Knob portion is 12mm long

Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer
Alpha Solid Shaft Stacked Concentric Audio Taper Pot, 500K / 500K, with nut, lock and Dress Washer. Metric. Outer (lower) shaft 8mm diameter, inner (upper) shaft 6mm diameter. Outer (lower) shaft 10mm height, inner (upper) shaft 10mm height. Threaded...

On-On-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/On/On Specifications Type: mini toggle switch Electrical function: on/on/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...

On-On 3-Pole Mini Switch, Chrome
...

On-Off-On 2-Pole Mini Switch, Chrome
Delano Mini Toggle Switch - 2-Pole On/Off/On Specifications Type: mini toggle switch Electrical function: on/off/on Number of poles: 2 Solder lugs: 6 Color: chrome plated Mounting hole (mm):...

Alpha 25k Volume Push/Pull Potentiometer
Alpha 25k Audio Taper Volume Push/Pull Potentiometer with 6mm Split Shaft For use with active pickups like EMG

Dual 25k Blend/Balance MN Taper Pot.Use with active pickups
Dual 25k Blend/Balance MN (linear) Taper Pot, with Center Detent and hardware. Use with active pickups, EMG...some others Technical Specifications: Threaded Bushing Diameter: ~.272" Threaded...

500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer.
500K A Push/Pull Audio Taper Potentiometer, With Nut and Washer. Split-Shaft

500K Volume Pot
500K Mini Pot, Audio Taper, 3/8" Long Bushing, Split, Knurled Shaft with Nut and Washer

250K/500K Stacked, Solid-Shaft, Audio Taper Potentiometer
250K/500K Audio taper, Solid Shaft Potentiometer. Will not work with push on style knobs. 3/8" mounting hole. Top shaft is 3/16"(4.75mm) diameter and bottom shaft is 17/64"(6.75mm) diameter. Will only work with the Fender Chrome Upper, and Black...

On-On Mini Switch, DPDT, With Mounting Hardware
On-On Mini Switch, DPDT, With Mounting Hardware

On-On-On Mini Switch, DP3T, With Mounting Hardware
On-On-On Mini Switch, DP3T, With Mounting Hardware

Metal "football" jack plate for Guitar & Bass
Football shaped, with screws. Jack hole diameter is 3/8" (9.5mm). The mounting screw holes spacing - 1-7/16" (36.5mm). The jack plate has a slight curve to match the body's curved sides.

Jazz Bass Control Plate in Chrome, Black, or Gold
These are aftermarket replacement control plates intended for Fender Jazz basses equipped with a control plate, or your own custom Jazz Bass inspired creation. The three potentiometer holes are for 3/8"(9.52mm) diameter pot shafts such as CTS, and...

ElectroSocket Jackplate in Chrome, Black, and Gold
Allparts ElectroSocket jackplate with Screws Takes Switchcraft 1/4" Input Jack. Fits onto the standard 7/8"-diameter hole. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening. Chrome,...

Allows you to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.
Pair of Brass Pot Sleeves (Quantity of two) Used to convert 6mm diameter split shaft or solid shaft pots into a 1/4"(6.3mm) solid shaft pot. Allows you to use knobs meant for 1/4"(6.3mm) solid shafts.

Switchcraft #11 1/4" Mono Input Jack
1/4" Mono Input jack, Switchcraft #11, with nut and washer. Requires 3/8"-diameter mounting hole. 3/8 x 32 threaded portion is 1/4" long.

American Vintage 62 Jazz Bass Pre-wired Control Assembly Pre-wired on our bench for you. Just connect your bridge ground and pickups and go. This classic configuration gives you a dedicated volume and tone for each pickup via vintage style chrome...

Complete UNWIRED KIT with parts to upgrade to a 62 Jazz set-up.
American Vintage 62 Jazz Bass Complete Wiring Kit Everything you need to recreate the legendary 62 Jazz bass wiring on your own Jazz bass. This classic configuration gives you a dedicated volume and tone for each pickup via vintage style...

3-Hole Jazz Bass Control Plate
Jazz Bass control plate with three holes for controls. Perfect for building your own 62' Jazz Bass style passive control layout.

Chrome Knurled Upper Knob for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Chrome knurled knob. Set screw mount. Designed to fit concentric solid 3/16"(4.75mm) shaft potentiometer used on the American Vintage '62 Jazz Bass®. Package includes mounting set screw.

Black Knurled Lower Knob for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Black knurled knob. Set screw mount. Package includes mounting set screw. Designed to fit concentric solid 17/64"(6.75mm) shaft potentiometer used on the American Vintage '62 Jazz Bass®

Detent Spring Plate for '62 Jazz Bass Concentric Solid Shaft Potentiometer
Small metal detent spring plate. Mounts under the fastening nut for dual potentiometer to provide tension for the lower control knob and prevent slipping.

Fits standard split shaft pots with 6mm diameter. Push-on knobs.
Fits standard split'shaft pots with 6mm diameter. Push-on knobs.

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Beveled Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw. Dimensions of 3/4"(19.0mm) diameter x 3/4"(19.0mm) height.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw.
Concentric Stacked Metal Beveled Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concentric) pots. Fits pots that have a lower shaft diameter of 8mm and an upper shaft diameter of 6mm.Secures with set screw....

Fits standard split shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.
Metal Dome Knob Fits standard split'shaft pots and solid shaft pots with 6mm diameter. Secures with set screw.23/32"(18.2mm) inch tall x 3/4"(19.0mm) inch wide.

These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Secures with set screw.
Concentric Stacked Metal Dome Knob - EMG These knobs fit on Bartolini and Aguilar preamps that have stacked (concetric) pots. Fits pots that have a lower shaft or 8mm and upper shaft of 6mm. Top knob is 7/16"(11.1mm) inch tall x 9/16"(14.3mm)...