Electronics

Frankie - Bass Tech Will these Electronics work with your Bass? Ask Frankie, our Bass Tech.

We carry a wide array of electronics and electronic components to provide either replacement for your failing electronics or allow you to finish the custom dream build that you are planning or working on. Everything from passive wiring harnesses, potentiometers, switches, jacks, shielding tape for your control cavity, capacitors, jack plates, battery clips, battery holders, and even wire and heat shrink tubing are available. If you require something that you do not see listed please feel free to contact us.

Frequently Asked Questions

Question: Where Can I Buy Electronics?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter
  1. CTS 250k Audio Potentiometer - Solid Shaft

    $7.00
    250k Audio Potentiometer
    Specifications Resistance 250kΩ Body Depth 0.45 in. Body Diameter 0.95 in. Bushing Length 0.25 in. Power Rating 0.33 W Shaft Diameter 0.25 in Shaft Length 0.38 in. Shaft...
  2. CTS 250k Volume Potentiometer Audio Taper 1/4 inch

    $7.48
    250k Audio Pot with hardware
    250K Audio Pot, CTS, solid shaft with nut, lock and dress washer. Threaded bushing is 3/8" tall.
  3. Alpha 250k Volume Potentiometer Audio Taper Push/Pull 6mm Split Shaft

    $13.77
    250K Push/Pull Audio Taper Potentiometer, With Nut and Washer
    250k Push/Pull (DPDT) Audio Taper Potentiometer. Includes nut and washer. This pot can be used for: Volume Push/Pull Active/Passive for onboard preamp systems. Volume with Push/Pull for coil tapping a single dual coil pickup Tone...
  4. Noble 250k Volume/Tone Potentiometer Audio Taper Stack 6/8mm lower Solid Shaft

    $20.00
    Stacked Concentric Pot, 250K/250K, With Nut, Lock and Dress Washer, Metric
    Stacked Concentric Audio Taper Pot. 250k/250k. Includes Nut, Lock and Dress Washer. No Detent This pot can be used for: Volume/Volume Stack applications Volume/Tone Stack applications
  5. Noble 250k Blend M/N Taper as used in Aguilar preamps

    $8.00
    Noble 250k MN Taper Blend Pot
    Noble - 250 K Blend Pot - Z250K/X250K Blend - aka MN taper - as used in Aguilar preamps New Version *250k MN taper blend pot is standard equipment in Aguilar preamps. (MN taper blend pots are also used in other brands of preamps, such as Glockenklang) **The...
  6. Noble 250k Volume Potentiometer Audio Taper 6mm Split Shaft

    $5.75
    Volume Pot (250K - typical)
    Volume Pot (250K - typical) Click Here For Dimensional Drawing
  7. Noble 250k Blend Potentiometer A/C Taper as used in Nordstrand Preamps

    $8.00
    Noble - 250 K Blend Pot - A250K/C250K Blend - as used on Nordstrand preamps
    Noble 250k AC Taper Blend Pot *250k AC taper blend pot is standard equipment in Nordstrand preamps. (AC taper blend pots are also used in other brands of preamps, such as Bartolini) **The taper of the blend pot is largely a matter of...
  8. Delano Control Pot 50kB + 250kA

    $19.00
    Double function potentiometer design is for combining passive tone control with active treble control in a single shaft unit. In active mode the 50KB section with center click is working, in passive mode you will have a 250KA tone roll-off from center click position through anticlockwise.
    This special double function potentiometer design is for combining passive tone control with active treble control in a single shaft unit. In active mode the 50KB section with center click is working, in passive mode you will have a 250KA tone roll-off...
  9. Glockenklang M/N Taper Blend Pot

    $12.00
    Glockenklang M/N Taper Blend Pot for 2 and 3-band Systems.
    Glockenklang M/N Taper Blend Pot for 2 and 3-band Systems. Circuit Board mounted with lead wiring.
  10. Bourns 250k MN taper blend 6mm (.236 in.) split shaft potentiometer

    $8.00
    Dual MN taper blend-balance with center detent.
    Bourns 250k MN taper blend 6mm (.236 in.) split shaft potentiometer Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8"...
  11. Bourns 250k audio taper mini 6mm (.236 in.) solid shaft potentiometer

    $7.60
    Mini Carbon Element, Solid Shaft.
    Bourns 250k audio taper mini 6mm (.236 in.) solid shaft potentiometer Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features: Carbon element 1/4"...
  12. Bourns 250k audio taper push/pull 6mm (.236 in.) split shaft potentiometer

    $15.00
    Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer.
    Bourns 250k audio taper push/pull 6mm (.236 in.) split shaft potentiometer Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs. This Bourns Guitar Potentiometer with Push-Pull...
  13. Bourns 250k audio taper mini 6mm (.236 in.) split shaft potentiometer

    $8.00
    Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
    Bourns 250k audio taper mini 6mm (.236 in.) split shaft potentiometer Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs. 17mm Body Diameter ¼ watt 300° rotation ¼"...
  14. NOLL 500kb Volume/500ka Tone Potentiometer Linear/Audio Taper Stacked Push-Pull 4/6mm Solid Shaft

    $74.00
    500KB Volume + 500KA Tone Control (Push/Pull) P 1063
    Noll 500kb/500ka Stacked Volume/Tone Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...
  15. NOLL 250k Volume/Volume Potentiometer Linear Taper Stacked 4/6mm Solid Shaft

    $26.00
    2x 250KB Volume Control
    Noll 250k/250k Stacked Volume Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Volume/Volume 250k Threaded section is M10 x 0.75, Length 10mm, Solid Shaft is...
  16. NOLL 250k Volume/Tone Potentiometer Linear/Audio Taper Stacked Push-Pull 4/6mm Solid Shaft

    $44.00
    250KB Volume + 250KA Tone Control (Push/Pull)
    Noll 250k/250k Stacked Volume/Tone Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...
  17. NOLL 250k Volume/Tone Potentiometer Linear/Audio Taper Stacked 4/6mm Solid Shaft

    $26.00
    250KB Volume + 250KA Tone
    Noll 250k/250k Stacked Volume/Tone Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. 250KB Volume + 250KA Tone Stacked Control Threaded section is M10 x 0.75,...
  18. NOLL 250k Volume/Volume Potentiometer Linear Taper Stacked Push/Pull 4/6mm Solid Shaft

    $74.00
    2x 250KB Volume Control (Push/Pull)
    Noll 250k/250k Stacked Volume/Volume Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching...
  19. NOLL 250k Tone/Tone Potentiometer Audio Taper Stacked Push/Pull 4/6mm Solid Shaft

    $74.00
    2x 250KA Tone Control (Push/Pull)
    Noll 250k Stacked Tone/Tone Push-Pull Control This potentiometer design is for various space-saving applications, depending on the resistance value and taper. Its on-on double pole push-pull section can control pickup switching or active-passive...

Frequently Asked Questions

Question: Where Can I Buy Electronics?

Answer: You can buy these from Best Bass Gear by Calling 877-839-3531 or Emailing us at sales@bestbassgear.com or chatting with our Bass Techs

Shop By Filter